Sagem MF9300 Operation Manual - Power On and Off

13

1

POWER ON AND OFF

The power switch is located on the left side of the machine.

POWER ON

Turn the power switch to the "ON" position.

• When the power switch is turned to the "ON" position, 

the message "WARMING UP. A COPYING JOB CAN 

BE SET NOW." will appear in the message display and 

the machine will start warming up. When "READY TO 

COPY." appears, the machine is ready to copy. Copy 

settings can be selected during warm-up.

• If auditing mode is enabled, "ENTER YOUR 

ACCOUNT NUMBER." will appear. When a valid 

account number is entered, the account status will 

appear on the main screen for several seconds. 

Then copying can be performed. (See "Key 

operator's guide".)

POWER OFF

When the machine is not used for a long time, be sure 

to turn it off.

Make sure that the machine is not in operation 

and then turn the power switch to the "OFF" 

position.

If the power switch is turned off while the machine is in 

operation, a misfeed may occur and the job that was in 

progress will be cancelled.

When the power switch is turned on, the machine starts up in the previously used mode. The following 

explanations assume that the previously used mode was copy mode.

Note

ON

OFF

If the fax option is installed, be sure to keep the power turned on. Faxes cannot be received when the power is 

turned off.

Note