Sagem MF9300 Operation Manual - Finisher (Sg-Fn3)
77
PERIPHERAL DEVICES AND SUPPLIES
6
FINISHER (SG-FN3)
When an optional finisher (SG-FN3) is installed, the machine can automatically staple the sorted copies. Each
collated set of copies or group of copies can be stacked offset from the previous set. (Offset function p.35)
Part names
Specifications
SG-FN3
Tray capacity
Top tray
100 sheets
Offset tray
1,000 sheets (500 sheets for sizes larger than A4 (8-1/2" x 11"))
Paper size
Size
Top tray: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Offset tray: B5 to A3 (8-1/2" x 11" to 11" x 17")
Weight
52 g/m
2
to 128 g/m
2
(14 lbs. to 34 lbs.)
Offset
Approx. 27 mm (1")
Paper sizes that can be
stapled
B5, A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17")
Stapling capacity
30 sheets (80 g/m
2
(21 lbs.))
Power supply
Drawn from the machine
Weight
Approx. 19 kg (42 lbs.)
Dimensions
Exit area
470 mm (W) x 511 mm (D) x 540 mm (H)
(18-33/64" (W) x 20-1/8" (D) x 21-17/64" (H))
Stapler compiler
562 mm (W) x 444 mm (D) x 109 mm (H)
(22-9/64" (W) x 17-31/64" (D) x 4-19/64" (H))
As a part of our policy of continuous improvement,
SAGEM
reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units and there may be some deviations from these values in individual units.
Stapler compiler cover
Offset tray
Top tray
Top cover
Stapler cover
Note