Sagem MF9300 Operation Manual - page 83
81
APPENDIX
7
* The first-copy time and warm-up time may vary depending on the power-supply voltage, ambient temperature, and other
operating conditions.
Developer system
Magnetic brush development
Light source
Xenon lamp
Resolution
Scan: 400 dpi
Output: 600 dpi
(AUTO/TEXT/PHOTO mode)
Scan: 400 dpi
Output: 1200 dpi
(SUPER PHOTO mode)
Gradation
Scanning: 256
Printing: 2 value
Power supply
Local voltage ±10% (For this machine power supply requirements, see the name
plate located on the back of the machine.)
Power consumption
Max. 1.4 kW
Overall dimensions
(with bypass tray folded)
623 mm (W) x 609.5 mm (D) (24-17/32" (W) x 24" (D))
Weight
Approx. 47 kg (103.7 lbs.) (Not includes toner cartridge)
Dimensions
623mm (W) x 609.5mm (D) x 785.5mm (H)
(24-17/32" (W) x 24" (D) x 30-15/16" (H))
Operating conditions
Temperature: 15°C to 30°C (59°F to 86°F), Humidity: 20% to 85%
Noise level
Sound Power Level L
wA
(1B=10dB)
Copying: 6.3[B]
Standby: 3.6[B]
Sound Pressure Level L
pA
(bystander positions)
Copying: 50[dB(A)]
Standby: 25[dB(A)]
Sound Pressure Level L
pA
(operator position)
Copying: 51[dB(A)]
Standby: 20[dB(A)]
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measured according to
RAL-UZ62)
Ozone: 0.02 mg/m
3
or less
Dust:
0.075 mg/m
3
or less
Styrene: 0.07 mg/m
3
or less
As a part of our policy of continuous improvement,
SAGEM
reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note