Sagem MF9300 Operation Manual - Executing A Job Program

55

USER SETTINGS

4

EXECUTING A JOB PROGRAM

1

Press the [

] key.

2

Touch the program number key of the 

desired program.

The job program will be 

executed. A number for 

which no job program 

has been stored cannot 

be selected.

3

Place the original, check the original 

size, and then set the number of 

copies and any other desired copy 

settings not stored in the program. 

When finished, press the [START] key 

(

).

DELETING A STORED JOB PROGRAM

1

Press the [

] key.

2

Touch the [STORE/DELETE] key.

3

Select the program number of the 

program to be deleted.

If a number key for which 

no job program has been 

stored is selected, the 

proceed to step 4 on the 

previous page (for 

storing a job program).

4

Touch the [DELETE] key.

The selected program will 

be deleted and you will 

return to the screen of step 

3. If the [CANCEL] key is 

touched, you will return to 

the screen of step 3 

without deleting the 

program. 

If you are finished deleting programs, touch the [EXIT] 

key in the screen of step 3 to exit.

ACC.#-C

S

JOB PROGRAMS

PRESS PROGRAM NUMBER.

RECALL

ACC.#-C

ACC.#-C

S

NUMBER.

ECALL

STORE/DELETE

EXIT

STORE/DELETE

RECALL

STORE/DELET

A JOB PROGRAM HAS BEEN ALREADY STORED.

STORE ANOTHER PROGRAM?

CANCEL

DELETE

STORE