Sagem MF9300 Operation Manual - page 54
52
USER SETTINGS
GENERAL PROCEDURE FOR CUSTOM SETTINGS
1
Press the [CUSTOM SETTINGS] key.
2
Touch the key of the desired setting.
The setting screen will appear.
Each of the custom settings is explained on the
following pages.
The [TRAY SETTINGS] key is selected in the
following example.
When the [TRAY SETTINGS] key is selected, the
following screen appears.
3
Touch the [OK] key in the setting
screen to close it.
4
When you are ready to exit the custom
settings, touch the [EXIT] key.
• When a checkbox appears next to an item
in a screen, touch the checkbox (
) to
select the item. A checkmark (
) will
appear to indicate that the item is
selected.
In the above settings, tray 1 can be used
for printer, copy, and fax mode. Tray 2 and
tray 3 can only be used for copy mode.
• For a detailed explanation of the trays,
see "CHANGING A TRAY’S PAPER
TYPE AND PAPER SIZE SETTINGS"
(p.19).
DATA
LINE
B STATUS
CUSTOM SETTINGS
CUSTOM SETTINGS
TOTAL COUNT
TRAY SETTINGS
ADDRESS
CONTROL
KEYBOARD
SELECT
KEY OPERATOR PROGRAMS
CLOCK
DISPLAY
CONTRAST
LIST PRINT
FAX DATA
FORWARD
RECEIVE MODE
EXIT
CUSTOM SETTINGS
TRAY SETTINGS
TRAY 1
TRAY 3
TRAY 2
PLAIN / B4
PLAIN / A3
TYPE / SIZE
FAX
OK
1/3
PLAIN / A4
COPY
Note
CUSTOM SETTINGS
TOTAL COUNT
TRAY SETTINGS
KEYBOARD
SELECT
KEY OPERATOR PROGRAMS
CLOCK
DISPLAY
CONTRAST
ADDRESS
CONTROL
LIST PRINT
FAX DATA
FORWARD
RECEIVE MODE
EXIT