Sagem MF9300 Operation Manual - Bypass Feed (Special Paper)

26

COPY FUNCTIONS

BYPASS FEED (special paper)

The bypass tray must be used to feed special papers such as transparency film and labels. The bypass tray can also 

be used to feed standard copy paper.

1

Place the original(s). (p.22, p.23)

2

Insert the paper (print face down) all 

the way into the bypass tray.

For paper that can be 

used in the bypass tray, 

see "PAPER" (p.15).

To load paper, see 

"Loading paper in the 

bypass tray" (p.18).

3

Touch the [PAPER SELECT] key or 

the tray in the image of the machine in 

the touch panel, and select the bypass 

tray.

Set the type of paper that 

you loaded in the bypass 

tray. (p.20)

4

Select the number of copies and any 

other desired copy settings, and then 

press the [START] key (

).

Shifting the starting position of copying

When copying on a special size of paper in the bypass tray, the starting position of printing can be shifted vertically 

for fine adjustment of the image position. To adjust the starting position of printing, follow the steps below. This 

function can only be used when feeding special sizes of paper from the bypass tray.

1 Touch the [PAPER SELECT] key and then touch the [EXTRA 

IMAGE ADJUST] key on the bypass tray.

2 Use the 

 key or 

 key to adjust the printing position, and 

then touch the [OK] key.

• The position can be adjusted from -10 mm to +10 mm in 0.5 mm 

increments (-0.5 inch to +0.5 inch in 0.02 inch increments).

• When a setting from -10 mm to -0.5 mm (-0.5 inch to -0.02 inch) is 

selected, the starting position of printing is moved to front from the 

standard position. When a setting from +0.5 mm to +10 mm 

(+0.02 inch to +0.5 inch) is selected, the starting position of printing is moved to rear.

EXPOSURE

AUTO   A4

PAPER SELECT

100%

ACC.#-C

READY TO COPY.

EXTRA IMAGE ADJUST

TO FRONT TO REAR

OK

0

(-10  10)

 mm

0.0