Samcen SCS8000E Administrator's Manual - page 20
-
- 12 -
2.1 General Information Configuration
Steps to configure general information:
1)
Select the network type of the videoconferencing system;
2)
Configure the alias information of the MCU.
Select the General Information Configuration in the Setup Wizard interface,
click <Next>.
Note : For details on configuring general information, please refer to SCS8000E Quick
Start Guide.
2.1.1 Determining Network deployment
Videoconferencing system can be deployed in the LAN network, WAN network or
LAN & WAN mixed network.
O
LAN Network: All equipments in your videoconferencing system are
deployed in LAN, as the following topology figure shows.
Figure 2-2-1 LAN Network
O
WAN Network: All equipments in your videoconferencing system are
deployed in the WAN, as shown in the following topology.