Samcen SCS8000E Administrator's Manual - page 40
-
- 32 -
7.2 MCC–MT Management
Go to Boardroom to execute the operations.
7.2.1 Invite MT to Join
Invite MT during meeting
1）
In the Boardroom interface, right click an empty area of the conference;
2）
Input the MT’s parameters, and click < Add >;
Parameters
Introductions
Call MT
Fill in the MT E.164 ID, IP address, or select
the MT from the AddrBook.
MT Rate
Default rate matches the conference rate.
Add to AddrBook
Add the MT’s information to AddrBook.
Exit after Add
Exit automatically from this interface when
click Add button.
Invite MTs to the conference
Add MTs when you are creating a template. For details, please refer to section
6.1.
7.2.2 Delete MT
In Boardroom interface, choose the icon of the MT to be deleted:
O
Right click, select Delete MT, and click <OK> in the pop-up alert box.
O
Press the < Delete > key in the keyboard.
O
In Conf List interface, select the MT in MT Information List, right click, select
Delete MT.
7.2.3 Hang up MT
Right click the icon of the MT to hang up the connection with the current MT,
select Hang up MT. The MCU can recall this MT to join in conference.
7.2.4 Forbid MT to Join
Using a template to start a conference, when create the template select Not Open
as the open mode, that is to say, only invited MTs can join in the conference.
How to set up
1）
In Templates interface, choose a template, then click Modify > Advanced
Info;
2）
In the pop-up Security Settings on the interface box, select Open Mode >
Not Open;