Samcen SCS8000E Administrator's Manual - page 37
-
- 29 -
7.1.6 Start/Stop Discussion
To start discussion conference will occupy the mixer resources on the MCU.
When the resource is sufficient you can start the discussion conference.
Start
Click Settings in Boardroom, select Discussion in the pop-up menu. The
SCS8000E supports up to 32 MTs to join a discussion conference.
Stop
During the discussion conference, select Discussion once again to stop it.
7.1.7 Mixing
Conference in mixing status, only the designated members can join the discussion,
and other members receive the sound of the members of the discussion group,
the speaker takes the initiative in occupying a mixing channel.
Mixing can select MTs through single mode or extend mode.
The operating procedure for the Single Mode is as follows:
1）
Click Settings in Boardroom, select Mixing in the pop-up menu
；
2）
In the Mixing Style field select the number of mixing channels; SCS8000E
supports up to 32 channels;
3）
Drag the MTs from the boardroom to each channel, and click <Start> ;
4）
Click a mixing channel, and the mixing of the MT will be ended.
Under the premise of mixing, if another MT requests to chime in, the MT can
automatically participate into the mixing group after the approval of the MCC or
the chairman.
The operating procedure for the Extend Mode is as follows:
1）
Select an MT (tick the check box before the MT) to be added to the mixing
group;
2）
Click <Start> to start mixing;
3）
Click <Stop> to stop mixing.
Note: If the previous operation of the mixing is single model, it will automatically access to
the single mode next time. With he Extend Mode situation is the same as the Single Mode.