Samcen SCS8000E Administrator's Manual - page 32
-
- 24 -
Conf
Password
The verification password of the conference, it is also a
password for attending the Data Conference or for MCC to
control the conference.
Encryption
Select a encryption mode for transmitting information of a
conference. If the user selects the Encryption, the encryption
mode will be applied to all MTs.
Manual Key
After the AES is selected in Encryption, set manual
key.Cascade MCU must be set the same key when the
Manual Key is selected.
Conference
Call Mode.
The Conference Call Mode completes the MCU-call-MT settings: Timed: “0”
indicates no limitation, the interval of calls made to each offline terminal when
Timed is selected. The default value is 20s.
Accept
Conf
Cascade Cal
This option should be selected for both the superior and
subordinate MCUs to support conferences to combine.
Enable IPLR
Used to select whether to enable the IPLR (Intelligent Packet
Loss Recovery) mechanism.
Advanced
Settings
Auto End
The conference will automatically end when no MT in the
conference.
Discussion
Conf
In discussion conference, the sound of all Ms will be mixed in
the MCU and broadcasted to the whole conference, so that all
MTs can be heard by each other.
Initial Mute
At the beginning of the conference, MTs stop collecting audio
signals, then the MCC or the MT to change this state after the
beginning of the conference.
Data Conf
A data conference means the T.120 conference. The audio
and video format of the conference will be set to G.711 ALAW
or
G.711 ULAW
and
H.263 when the data conference is
needed.
Multicast
The valid multicast IP addresses range from 225.0.0.0 to
231.255.255.255 and 233.0.0.0 to 239.255.255.255
How to deal
with when no
more terminals
supported to
carry on
discuss
The MCU supports intelligent audio mixing contains 64
terminals at the most, You can select which way to deal with
the situation that the terminals in discussion conference are
more than the maximum intelligent mixing terminal number.
The optional ways are Switch to Mix (custom mixing) and Stop
Discussion.
Auto Record
If this check box is selected, the user needs to select a online
recorder to be used from the Recorder list.
Record Type
It includes Daily and Weekly. Here, the user can set to make
recording every day, a day or several days in a week.
Record Time
Set the Start Time and End Time of record.
Record with
Dual Video
If there are two channels of conference images are
transmitted, these two image codes will be recorded at the
same time.
Conference
Record
Settings