Spypoint LINK-3G User Manual - page 12
12
night mode:
Allows the user to set the best option for photos.
temp. units:
(°C/°f)
Allows the user to select the temperature display.
about the device:
Allows the user to displays system information:
- Software version number
- Hardware version number
- Model number
- Modem version
- IMEI
- SIM
- Region
factory reset:
Allows the user to restore the device to its original state.
Schedule
Allows the user to set the operation period of the camera for each day
of the week. The start and stop time programmed hours are the hours
during which the camera is in action and records photos or videos. For
example, if the user selects "3:00 AM" start time and "7:00 PM" stop time
on Mondays, the camera will only detect for that period of time and will
stay inactive for the remaining hours. Each day has to be be configured
independently.
For a 24 hour activation, the start and stop time must be 12:00 AM. These
hours are the basic settings of the camera.
lIt-09 charger:
on/off
Allows the user to charge the LIT-09 battery pack from an external source.
ON when:
• LIT-09 + 12V power source and/or solar panel
OFF when:
• 6AA • LIT-09 • 12V • 6AA + 12V
Battery type:
aa/lIt-09/12V/auto
Allows the user to select the battery type he is using to get a more precise
battery level reading
Info on photos:
(yes/no)
Allows the user to have date, time, temperature and moon phases printed
on the photos.
New
moon
Waxing Crescent
First
Quarter
Waxing Gibbous
Full
moon
Waning Gibbous
Last
Quarter
Waning crescent
illumination modes comparison*
(Night modes)
* Available for photos only
optimal
MODE
IR-boost
MODE
blur reduction
MODE
Blur reduction
Battery life
Flash range
Settings