Spypoint LINK-3G User Manual - page 5
5
1
Photo lens
Image sensor and infrared filter.
2
Invisible LEDs
Night lighting to obtain black and white photos
and videos.
3
Test light
Flashes in TEST mode when there is detec-
tion and flashes 60 seconds in PHOTO/VIDEO
mode to allow the user to leave without being
photographed or recorded.
4
Light sensor
Allows the lighting of the LEDs panel at night.
5
Battery case
Case for AA batteries or a rechargeable
lithium battery pack.
6
Fresnel lens
Expands the detection area and increases the
sensitivity of the camera’s motion sensor.
7
Mounting bracket
Removable support to install the camera.
8
Slot for installation
strap
Allows the user to install the camera using
the installation strap included.
9
Tripod mount
Standard ¼-20" tripod mount.
10
Cable lock hole
Allows the user to install a CL-6FT cable lock,
sold separately.
11
BUSY LED
Lights up when TEST mode is activated.
12
Viewing screen
Allows the user to access the main menu and
view photos/videos.
13
Navigation buttons
Buttons to set the camera.
14
Power button
Press the button to turn on or off the camera.
15
12V power jack
Solar panel jack
This camera can be powered from an external
12-volt DC input such as a 12V battery or a
12V adapter, each sold separately.
Allows the user to connect a solar panel
(SP-12V) to maintain the charge of the
lithium battery pack (LIT-09/LIT-C-8), sold
separately.
16
USB port
To transfer photos/videos to a computer.
17
SD card slot
An SD card is required to record photos/
videos.
18
Micro SIM card slot
A Micro SIM card is required for cellular functions.
Components