Spypoint LINK-3G User Manual - page 8
8
MEMoRy CaRD
A memory card is required to record photos and videos. The camera is
compatible with SD/SDHC memory cards, up to 32 GB capacity (sold
separately).
When the camera is turned on and no memory card is used, the camera
beeps. In TEST mode, the screen displays "Insert Memory Card".
Here is a table of the approximate number of photos and length of videos
that can be recorded with different memory card capacities. Many photo
and video resolutions are noted, see those corresponding to the camera.
note: This SPYPOINT camera is equiped with continuous file
recording. When the memory card is full, the camera will continue to record
photos or videos by deleting the first recorded files.
4 GB
8 GB
16 GB
32 GB
Photo
8 MP
2400
4800
9500
19000
10 MP
1900
3800
7600
15200
12 MP
1600
3200
6300
12600
Video
320 x 240
4 h
8 h
16 h
32 h
640 x 480
2h10
4h10
8h20
16h40
1280 x 720
40 min
1h20
2h40
5h20
InSERtInG thE MEMoRy CaRD
Before inserting or removing a memory card, always turn off the camera to
prevent loss or damage of the photos already recorded. Insert an SD/SDHC
memory card (up to 32 GB capacity) in the card slot, gold contacts facing
up. The card is inserted correctly when a click is heard.
We suggest to format your SD card if it's been in another electronic device
to make sure you will have the maximum capacity of your memory card.
REMoVInG thE MEMoRy CaRD
Lightly press the memory card into the camera once to pop it out of the slot
and remove it.
MICRo SIM CaRD
The use of a micro SIM card is required to take advantage of the cellular
features of the camera.
InSERt thE MICRo SIM CaRD
Before inserting or removing a micro SIM card, always turn off the camera.
Note that the micro SIM card need to contain the nano SIM card in order
for it to work.
Carefully insert a micro SIM card in the micro SIM card slot ( on the component
diagram), with the 45
0
corner first and the gold contact area facing down. The
card is inserted correctly when a click is heard.
REMoVInG thE MICRo SIM CaRD
Lightly press the micro SIM card into the camera once to pop it out of the
slot and remove it.
BUSy lED
The BUSY light, located below the screen, is a diagnostic tool. It lights up
when the camera starts, when the camera records a file, in DETECTION
TEST mode at the same time as the test light (located in front of the
camera), and during photo transmission.
Memory card, SIM card & BUSY LED
Nano
Micro
Standard
45
0