Spypoint LINK-3G User Manual - page 13
13
Installation & Mounting bracket
InStallatIon
Recommended installation height:
The camera should be installed at the same height as the animal’s mid-body.
Ideal installation for quality pictures & videos:
The targeted animal should be 25 feet / 7.5m away from the camera for a
better field of view.
To get brighter pictures at night , you should have elements in the
background to reflect back the IR flash to the camera.
Note that the camera should not directly be facing the sun to avoid back
lighting and false detection.
Make sure the front of the camera is free of any obstructions. The area
of installation should be cleared from branches or bushes. These could be
responsible for triggering false detections when combined with heat,
reflections and/or wind. Setting the sensitivity level of the camera too high
can also result in false detections by unwanted movement.
MoUntInG BRaCkEt
To remove the camera from the mounting bracket:
1. Push the tab to release the camera from the mounting bracket.
2. Remove the camera.
InStallatIon WIth thE SUPPlIED StRaP
Use the mounting bracket slot for the installation strap to fix the camera.
The dimensions of the strap (included) is 1" X 60".
1. Insérez l’extrémité de la courroie dans la fente
qui se trouve au dos du mécanisme.
2. Insérez la courroie dans la fente sous le levier
et faites-la ressortir en arrière.
3. Créer une tension sur la courroie en la tirant vers
la droite, puis rabattez vers la gauche le levier pour
maintenir la position.
1.
2.