Spypoint LINK-3G User Manual - page 9
9
Use the and buttons to navigate in the interface and modify the selection,
the OK button to select and the button to return to the previous menu.
StaRt CaMERa
Allows the user to start the camera in either,
PHOTO
,
VIDEO
or
TIME
LAPSE
mode. When a mode is selected, the test light in front of the
camera will flash for 60 seconds and a countdown will appear on the
screen to allow the user to leave the area without being photographed.
nEtWoRk tESt
Allows the user to test the cellular network to ensure a cellular signal
is available where you want to install the camera.
DEtECtIon tESt
Allows the user to test the detection system of the camera. When the
DETECTION TEST mode is selected, no photo or video is recorded. Walk
perpendicularly in front of the camera. When the camera detects a
movement, the busy light and the test light blink to indicate that normally, a
photo or video would have been recorded. If the system does not detect the
movement, increase the detection distance using the "Sensitivity" option
in the settings menu. Realigning the camera can also be required. In TEST
mode, it is possible to take a photo by pressing the OK button. The photo is
saved and appears in the VIEW mode.
VIEW
Allows the user to view or delete recorded photos and videos on the
camera screen.
9/9
1
2
3
1
Selected photo / total number of photos
2
The play icon indicates that this element is a video
3
The white outline indicates which photo is selected
Viewing with the screen of the camera:
When the VIEW mode is selected, the latest photos or videos recorded
appear as thumbnails on the screen. Press or to navigate this page,
and press OK to view a photo in large format. To view next or previous large
photo, press or . Press back to return to the thumbnail view.
When a large photo in opened, press OK to view the different options available:
Play:
Allows the user to play or pause the video on the screen
(this option is available only for videos).
Zoom:
Allows the user to zoom in or out.
Date and time:
Allows the user to view the date and time printed on
the photo.
Protect:
Allows the user to protect a photo or video to prevent it
from being deleted by selecting "Erase All".
Erase:
Allows the user to erase the photo or the video seen on
the screen from the memory card.
Erase all:
Allows the user to erase from the memory card all stored
photos and videos, with the exception of protected files.
Format:
Allows the user to format the memory card and delete
all protected photos and videos.
Exit:
Allows the user to exit the menu and return to the
viewing screen.
SEttInGS
Allows the user to the differents settings on the camera. From
PHOTO
,
VIDEO
,
TIME LAPSE
or
GENERAL
settings
Settings