SSHC TSSHC-3NPSBFS-16A User Manual - page 10
INS-TSSHC-3NPSBFS-16A-1209
10
Night mode timer adjustment procedure
1. First, switch to the Night mode by simultaneously press ing
down the + and - buttons and releasing them imme diately.
2. From the Night mode, simultaneously press down the + and -
buttons for more than 3 seconds until the icon SET starts
to blink, indicating that the adjustment of the Night mode
timer is effective. The figures that replace the Ambi ent mode
temperature indicate the current adjustment of the timer and
‘‘hrs’’ replaces the Floor mode temperature.
3. If needed, adjust the timer by pressing down the + button
to increase the value, or the – button to decrease it. The
adjustment range is from 1 hour to 999 hours. To quickly
scroll through timer values, press and hold down the but ton.
4. When the adjustment is completed, release the buttons
and wait for 5 seconds to exit the adjustment function. The
thermostat will then return to the Night mode.
N.B. The Night mode timer will be automatically reinitialized to the
latest recorded value when switching from the Day mode
to the Night mode. It is not necessary to read just the timer
every time you switch to the Night mode. The timer is also
reinitialized when this value is adjusted. Once the timer has
completed its cycle and when the thermostat is in the Day
mode, you must manually return to the Night mode. If you
want to automatically return to the Night mode, the Automatic
mode must be selected.