SSHC TSSHC-3NPSBFS-16A User Manual - Day Mode And Night Mode
INS-TSSHC-3NPSBFS-16A-1209
9
Day mode and Night mode
The thermostat includes a Day mode (Sun) and a Night mode
(Moon), both of them having their own independently adjust-
able and recorded set point. When switching from one mode
to the other, the system will automatically use the tempera-
ture set point corresponding to the Day/Night mode selected.
The Floor and Ambient temperature are displayed by the fig-
ures under the words Ambient and Floor, and the temperature
set points are displayed by the figures beside the word SET,
both in degrees Celsius or Farenheit. The standard factory set
point adjustment is 77°F for the Day/Floor mode (68°F from the
Ambient mode), and 72°F for the Night/Floor mode (60°F from
the Ambient mode).
In order to manually switch from one mode to the other, si-
multaneously press down the + and – buttons and release them
immediately.
Night mode timer
The Night mode features a timer that automatically returns to
the Day mode after a selectable time period. This timer allows
the temporary use of a temperature set point. The standard fac-
tory adjustment of the timer is 8 hours. With this adjust ment,
the thermostat automatically returns to Day mode 8 hours af-
ter being switched to the Night mode. You can switch from the
Floor mode to the Ambient mode without affecting the timer
adjustment.
For example, if you want a night temperature lower than the day
temperature, both Day/Night modes set points will first have to
be set at the desired temperatures. Before bedtime, the Night
mode temperature set point will be activated by switching man-
ually to the Night mode. The timer is set for the duration of the
night. The thermostat will automatically return to the Day mode
at the end of the night, and the Day mode temperature set point,
which is higher, will become effective at this time.