SSHC TSSHC-3NPSBFS-16A User Manual - 1. Description
INS-TSSHC-3NPSBFS-16A-1209
3
1. Description
The TSSHC-3NPSBFS-16A non programmable electronic ther-
mostat can be used to control ENERJOY radiant ceiling pan-
els or heating floors with electrical current − with a resistive load
− ranging from 0 A to 16 A at 120/208/240 VAC. It has an easy
user interface. It keeps the temperature of a room (Ambient
mode) and a floor (Floor mode) at a requested set point with a
high degree of accuracy.
Floor Mode (factory setting)
This control method is ideal in areas where you want a hot floor
at any time and when the temperature of the ambient air can be
high without causing discomfort. For example, in a bathroom.
Ambient Mode (you only have to press down the A/F button to
switch from one mode to the other)
This control method is ideal when you want a stable ambi ent air
temperature (without fluctuation). Usually, this mode is used in
large and often occupied rooms where temperature variations
can be uncomfortable. For example, in a kitchen, a living room
or a bedroom.
Some factors cause variations in ambient air temperature. They
include large windows (heat losses or gains due to out side tem-
perature) and other heat sources such as a central heating sys-
tem, a fireplace, etc. In all these cases, the Ambi ent mode will
ensure a uniform temperature.
This Thermostat is not compatible with the following
installations:
• electrical current higher than 16 A with a resistive load
(3840 W @ 240 VAC, 3475 W @ 208 VAC and 1920 W @
120 VAC);
• inductive load (presence of a contactor or relay); and
• central heating system.