TANDBERG 3000 MXP Profile User Manual - 5.3 Dvd / Vcr
Peripheral Equipment
221
5.3 DVD / VCR
Installing a VCR/DVD-recorder/player
DVD/VCR Playback
Mono
For playback, connect a cable between Video Out on the VCR and Video In (VCR) on the
system. Connect a cable between Audio Out on the VCR and the Audio In (VCR) on the system.
Choose VCR from the Presentation menu to activate the VCR input.
Make sure that Audio In (VCR) is On (see chapter
Audio
). If audio from VCR is too low, this level
can be adjusted in Audio Settings, Inputs, Level Settings. The audio from the VCR will be audible
in the local speaker system.
The audio from the VCR and your microphone(s) will be mixed and sent to the far end. When a
person talks on either local or far end, the VCR audio level will be reduced to make it easier to
comment on a video recording when Audio Settings, VCR Ducking: On.
Stereo
For stereo playback, connect:
Video cable between Video Out on the VCR and Video In (VCR) on the system
Audio cable between Audio Out (L) on the VCR/DVD and the VCR L (Audio In 3)
Audio cable between Audio Out (R) on the VCR/DVD and VCR R (Audio In 4)
Choose the VCR video source (se chapter
Presentation menu
) to automatically
activate the VCR audio and video input.