Summary of Professional P24WK

  • Page 1

    Warning: disconnect power before installing. Before turning power on, be sure that all controls are in the off position. Gas supply: natural gas – 6 inch water column. Propane gas – 11 inch water column. Electrical power supply: all professional cooktop models – 120 vac, 60 hz., 1ph., 15 amp circuit...

  • Page 2: Warning

    P age 2 important installation information table of contents warning .............................................................................................................................. 2 introduction ............................................................................................

  • Page 3: Caution

    P age 3 step 1: ventilation requirements caution (1) when connecting the unit to propane gas, make certain the propane gas tank is equipped with its own high-pressure regu- lator in addition to the pressure regulator supplied with this unit. The maximum gas pressure to this appliance is not to excee...

  • Page 4

    P age 4 step 2: cabinet preparation note: • if a solid side cabinet wall exists on one or both sides, you will need to notch the front corner of the cabinet to match the countertop notch and to allow clearance for the cooktop front (see detail a, figs. 3 and 4). • if a supporting deck is used, the s...

  • Page 5

    P age 5 step 2: cabinet preparation ∆ as defined in the “national fuel gas code” (ansi z223.1, latest edition). 0" bottom 18" min . 12" both sides 0" sides counter sunk screws fig. 2 installing side supports (both sides) a b b d 23-7/16" see detail a fig. 3 wall installation with countertop backspla...

  • Page 6

    P age 6 step 2: cabinet preparation fig. 5 side view of cooktop fig. 7 flush to cabinet front front flush with cabinets; minimum of 25-3/8" cabinet depth required. * provide clearance for screws by in- creasing cutout height by 1/16" or by notching in the location of the three screws. Fig. 6 project...

  • Page 7

    P age 7 detail b – see fig. 9, above suggested regulator installation installation options gas flow ➞ gas flow ➞ gas supply regulator make sure gas regulator is horizontal after installation installation option 1. From shut-off valve 3/4" nipple wall 3/4" flex adapter regulator 3/4" flex line 3/4" m...

  • Page 8: Important

    P age 8 step 3: unpacking, moving, placing & anchoring the cooktop 1. Remove the outer carton and packing material from the ship- ping base. Ensure that you have all cooktop components before proceeding. 2. Remove the top grate castings, burner caps and grill grate (if so equipped) to reduce unit we...

  • Page 9: Caution:

    P age 9 step 4: gas requirements & hookup caution: when connecting unit to propane gas, make certain the propane gas tank is equipped with its own high pressure regulator in addition to the pressure regu- lator supplied with the appliance. The pressure of the gas supplied to the appliance regulator ...

  • Page 10

    P age 10 step 5: electrical requirements, connection & grounding • always disconnect appliance electric supply cord from wall receptacle before servicing this appliance. • all cooktop models must be plugged into a mating 3-prong, grounding-type receptacle. The receptacle must be con- nected to a pro...

  • Page 11

    P age 11 the stainless steel surfaces may be cleaned by wiping with a damp soapy cloth. Any mild glass cleaner will remove fingerprints and smears. Follow all cleaning by rinsing with clear water. Wipe dry with a clean soft cloth to avoid water marks. For discolorations or deposits that persist, use...

  • Page 12: Caution

    P age 12 5551 mcfadden avenue, huntington beach, ca 92649 • 800/735-4328 ro 8608-a • 5040002711 • © 2002 bsh home appliances corp. • litho u. S. A. 6/02 thermador reserves the right to change specifications or design without notice. Some models are certified for use in canada. Thermador is not respo...