Thermador Professional P24WK Installation instructions manual - Important
P
AGE
8
STEP 3: Unpacking, Moving, Placing & Anchoring the Cooktop
1.
Remove the outer carton and
packing material from the ship-
ping base. Ensure that you have
all cooktop components before
proceeding.
2.
Remove the top grate castings,
burner caps and grill grate (if so
equipped) to reduce unit weight.
3.
Lift and place the cooktop in
the opening. Be careful not to
pinch the power cord or gas
inlet. Care should be taken not
to scratch the griddle or the
griddle frame.
4.
Ensure that the power line cord
is free and hanging loosely.
5.
Level the appliance. For proper
performance, the appliance
must be level.
6.
Level the Griddle: The griddle
(If so equipped) should be level
or tilted slightly forward and
IMPORTANT
• Verify that the appliance
is correct for the type of
gas being provided. Refer
to Step 4 before proceed-
ing with the installation.
• Attach the backguard be-
fore sliding the appliance
into the final installed po-
sition.
See Step 6.
should not rock. Screws are
installed in the back and front
ledges to eliminate rocking and
to adjust the level of the griddle.
To access these screws (see
Fig. 10), lift the back of the
griddle.
CAUTION
Proper equipment and adequate
manpower must be used in mov-
ing the appliance to avoid dam-
age and/or personal injury. The
unit is heavy and should be
handled accordingly.
7.
The grill (if so equipped) has
been leveled during assembly
so do not attempt to level the
grill.
8. Replace the top grate castings,
burner caps and grill grate (if so
equipped).
IMPORTANT
Fig. 10 Griddle leveling screws