U-Line CLR2060 Installation Instructions Manual - Figure 6
Other manuals for CLR2060:
Supplementary Manual, User Manual, Supplementary Manual, Features & Benefits, User Manual, Installation Manual, Service And Parts Manual
of
10
d. Attach the door panel to the wood panel using #10 x 5/8’’
(P/N 42121) wood screws and nylon spacers (P/N 42120).
The nylon spacers fit between the wood panel and the
door panel as shown (see Figure 6).
e. Remove the existing bottom pivot plate and replace with the
overlay panel pivot plate (P/N11901-2) (see Figure 7).
Door panel and wood panel must be aligned properly or
door will not operate correctly.
TYPICAL WOOD PANEL
TOP PIVOT PLATE
PLASTIC SPACER
SEVEN REQUIRED
#10 X 5/8" ROUND HEAD SCREW
SEVEN REQUIRED
DOOR PANEL
Figure 6
EXISTING DOOR
EXISTING BOTTOM PIVOT PLATE
(REMOVE AND DISCARD)
WOOD PANEL BOTTOM PIVOT PLATE
(5/8 INCH LONGER THAN EXISTING
BOTTOM PIVOT PLATE, FLUSH SIDE
FACING OUT)
#8-32 X 3/8" SEMS HEX SCREW
TWO PLACES