U-Line CLR2060 Installation Instructions Manual - Figure 1
Other manuals for CLR2060:
Supplementary Manual, User Manual, Supplementary Manual, Features & Benefits, User Manual, Installation Manual, Service And Parts Manual
of
10
1. Cut door panel to proper size (Figure 1). Be sure to note which model the door will be used on.
Figure 1
Rear View of Wood Panel For Right Hand Hinge Shown.
Use Mirror Image For Left Hand Hinges.
2. Create a relief (Figure 2) for pivot plate by cutting notch in top corner and coinciding back corner of panel.
Refer to the following figures for exact specifications.
Figure 2
Relief Notch for Pivot Plate
U-LINE034
1/8"
1/8"
13/16"
3/4"
29-7/8"
MODEL 2075: 23-3/4"
MODEL 2015 and CLR 2060: 14-3/4"
PIVOT PLATE RELIEF
SEE FIGURE 2
Printed in U.S.A.
P/N 30-10014 (Rev. 8/2004)
Full Overlay Panel Preparation for
Echelon
™
Models 2075, 2015 and CLR 2060
The full overlay door panel must not weigh more than 20 lbs. The thickness of the door