Vacon 100 flow Installation Manual - page 3
vacon • 1
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
Table of Contents
Document: DPD00091D
Version release date: 8.12.16
1.
Safety................................................................................................................2
1.1
Danger.................................................................................................................................2
1.2
Warnings .............................................................................................................................3
1.3
Earthing and earth fault protection ....................................................................................4
2.
BACnet - general info .......................................................................................5
3.
BACnet technical data.......................................................................................6
3.1
BACnet MS/TP protocol ......................................................................................................6
3.2
BACnet IP protocol..............................................................................................................6
3.3
ACD (Address Conflict Detection) .......................................................................................6
4.
Programming....................................................................................................7
4.1
BACnet MS/TP parameters and monitoring values ...........................................................8
4.2
BACnet IP parameters and monitoring values...................................................................9
4.2.1 Ethernet common settings .................................................................................................9
4.2.2 BACnet IP settings ..............................................................................................................9
4.3
BACnet MS/TP parameter descriptions ...........................................................................11
4.3.1 BACnet MS/TP Parameters ..............................................................................................11
4.3.2 BACnet MS/TP monitoring values ....................................................................................12
4.4
BACnet IP parameter descriptions...................................................................................13
4.4.1 Ethernet common settings ...............................................................................................13
4.4.2 BACnet IP settings ............................................................................................................14
4.4.3 BACnet IP monitoring values............................................................................................15
5.
Installation......................................................................................................16
5.1
VACON® 100 family AC drive............................................................................................16
5.1.1 Prepare for use through Ethernet ....................................................................................17
5.1.2 Prepare for use through RS485 ........................................................................................20
5.2
Installation in VACON® 100 X...........................................................................................24
5.2.1 Prepare for use through Ethernet ....................................................................................24
5.2.2 Prepare for use through RS485 ........................................................................................25
6.
Communications .............................................................................................27
6.1
Device Object.....................................................................................................................27
6.2
Object types and properties supported ............................................................................27
6.2.1 Binary Value Object ...........................................................................................................28
6.2.2 Analogue Value Object ......................................................................................................29
6.3
Control word bits...............................................................................................................31
6.4
Status word bits ................................................................................................................31
6.5
COV functionality ...............................................................................................................31
6.6
Processdata mapping in drive application .......................................................................32
7.
Fault tracing ...................................................................................................33
7.1
Typical fault conditions .....................................................................................................33
7.2
Other fault conditions .......................................................................................................34
8.
Quick setup .....................................................................................................36
9.
Annex - Protocol implementation conformance statement ............................37