- DL manuals
- Vacon
- Controller
- 100 flow
- User Manual
Vacon 100 flow User Manual - page 58
7
vacon • 56 Common Industrial Objects implemented by vacon® 100 family
Tel. +358 (0) 201 2121 • Fax +358 (0)201 212 205
7.3.3
Motor Control Mode Object, Class 0xA1
The Motor Control Mode Object is a vendor-specific object available in the VACON® 100 Family AC
drives which more clearly indicates to the user which motor control mode is used, and allows the
user to configure this mode.
7.3.3.1
Instance Attributes
Instance Attribute “ControlMode”
This attribute is used to detect or change the used motor control mode. The values allowed for this
attribute are listed in the table below.
Instance Attribute “FeedbackMode”
This attribute is used to detect or change the used feedback mode. The values allowed for this
attribute are listed in the table below.
Table 44. Motor Control Mode Object
Class name
Motor Control Mode Object
Class identifier
161
d
/ A1
h
Class
Attributes
Id
Access rule
Name
Datatype
Description
-
-
-
-
-
Class Ser-
vices
Id
Name
Description
-
-
-
Instance
Attributes
Id
Access rule
Name
Datatype
Description
1
Get/Set
ControlMode
USINT
Motor control mode
2
Get/Set
FeedbackMode
USINT
Motor feedback mode
Instance
Services
Id
Name
Description
14
d
0E
h
Get_Attribute_Single
Used to read single attribute value.
16
d
10
h
Set_Attribute_Single
Used to write a single attribute value.
Table 45. Motor Control Mode Values
Value
Description
0
d
Frequency control
1
d
Speed control
2
d
Torque control
Summary of 100 flow
Page 1
User manual ethernet/ip ac drives vacon ® 100 x vacon ® 100 flow vacon ® 100 industrial.
Page 3
Vacon • 1 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com table of contents document: dpd01045d version release date: 24.8.2016 1. Safety ...............................................................................................................3 1.1 danger ............................
Page 4
Vacon • 2 tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.3.2 assembly instance selector object, class 0xbe.............................................................54 7.3.3 motor control mode object, class 0xa1 ..........................................................................56 7.3.4...
Page 5
Safety vacon • 3 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 1 1. S afety this manual contains clearly marked cautions and warnings which are intended for your personal safety and to avoid any unintentional damage to the product or connected appliances. Read the information included...
Page 6
1 vacon • 4 safety tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 1.2 warnings the ac drive is meant for fixed installations only . Do not perform any measurements when the ac drive is connected to the mains. The earth leakage current of the ac drives exceeds 3.5ma ac. According to stan- dard en61...
Page 7
Safety vacon • 5 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 1 1.3 earthing and earth fault protection the ac drive must always be earthed with an earthing conductor connected to the earthing terminal marked with . The earth leakage current of the drive exceeds 3.5ma ac. According t...
Page 8
Ethernet/ip - general info vacon • 6 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 2 2. E ther n et /ip - g eneral info ethernet/ip is industrial ethernet network solution available for manufacturing automation. Ether- net/ip tm is a trademark of odva, inc. Cip™ (common industrial pro...
Page 9
2 vacon • 7 ethernet/ip - general info tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 2.1.1 acd (address conflict detection) the vacon® 100 family ac drives implement acd algorithm (ietf rfc 5227). The implementation includes requirements from the ethernet/ip protocol. The acd algorithm tries to a...
Page 10
Ethernet installation vacon • 8 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 3 3. E thernet installation 3.1 installation in vacon ® 100 industrial and flow figure 1. 1 open the cover of the ac drive. The relay outputs and other i/o-terminals may have a dangerous control voltage pres...
Page 11
3 vacon • 9 ethernet installation tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 3.2 prepare for use through ethernet figure 2. 3 connect the ethernet cable to its terminal and run the cable through the conduit as shown in figure 2. 4 protection class ip21: cut free the opening on the ac drive cov...
Page 12
Ethernet installation vacon • 10 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 3 figure 3. Leading the cables, left: ip21, right: ip54 figure 4. 5 remount the ac drive cover. Note: when planning the cable runs, remember to keep the distance between the ethernet cable and the motor cab...
Page 13
3 vacon • 11 ethernet installation tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 3.3 installation in vacon® 100 x 1 open the cover of the ac drive. 2 remove the cable entry plate. Note! The cable entry plate at the bottom of the drive is used only for mains and motor cables. 3 open the necessary ...
Page 14
Ethernet installation vacon • 12 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 3 4 attach a cable gland on the hole in the cable entry plate. Pull the ethernet cable through the hole. 5 put the cable entry plate back. 6 close the cover of the ac drive. 11739_00
Page 15
Commissioning vacon • 13 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 4 4. C ommissioning the integrated ethernet/ip protocol in the vacon® 100 family ac drive must be selected when or- dering the drive. If the drive is not equipped with the integrated ethernet/ip protocol, the ether...
Page 16
4 vacon • 14 commissioning tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 a fixed ip address is specified manually and it does not change. When the mode is changed from dhcp to fixed the fixed addresses are taken into use: ip: 192.168.0.10 subnet mask: 255.255.0.0 default gateway: 192.168.0.1 4.1....
Page 17
Commissioning vacon • 15 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 4 4.2.1 protocol in use when value is changed to one, protocol stack is activated. Please notice that if protocol is stopped (for example protocol is set to zero from panel) and com- munications have been open, it ...
Page 18
4 vacon • 16 commissioning tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 2 open requests 16 bit 2422 d for details, see instance attribute “open requests” in table 14. 3 open format rejects 16 bit 2423 d for details, see instance attribute “open format rejects” in table 14. 4 open resource reject...
Page 19
Ethernet/ip connection example vacon • 17 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 5 5. E ther n et /ip connection example preparing the connection 1. Set the ethernet/ip as the active protocol from the panel parameters. 2. Set proper ip addresses. 3. Open a connection with the s...
Page 20
Ethernet/ip vacon • 18 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 6 6. E ther n et /ip 6.1 overview the ethernet/ip (ethernet/industrial protocol) is a communication system suitable for use in industrial environments. The ethernet/ip allows industrial devices to exchange time-criti...
Page 21
6 vacon • 19 ethernet/ip tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 6.4 explicit messaging explicit messaging is used in commissioning and parameterizing of the ethernet/ip. The explicit messages provide multipurpose, point-to-point communication paths between two devices. They provide the typ...
Page 22
Ethernet/ip vacon • 20 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 6 6.4.2 general cip error codes the table below contains the error codes used by ethernet/ip. Table 8. General cip error codes code status name description 0 success service was successfully performed by the object s...
Page 23
6 vacon • 21 ethernet/ip tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 6.4.3 connection manager object error codes these are the extended status codes used when the general status code is 1. 29 h member not settable a request to modify a non-modifiable member was received. 46 d / 2e h service not...
Page 24
Ethernet/ip vacon • 22 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 6 6.4.4 supported cip and vendor objects the communication interface supports the following object classes. 789 d / 315 h invalid segment in connection path range 320h – 7ffh are vendor specific 800 d / 320 h interna...
Page 25
6 vacon • 23 ethernet/ip tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 6.4.5 ethernet/ip communication and connection timeout the ethernet/ip declares a watchdog the time within which both master and slave must send io back to each other. This watchdog time is a factor of the communication cycle ...
Page 26
Ethernet/ip vacon • 24 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 6 figure 7. Ethernet/ip timeout logic with explicit connection communicating received packet within “tcp inativity” time? Has user written process data over this connection communication timeout zero? Has additional ...
Page 27
Common industrial objects implemented by vacon® 100 family vacon • 25 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 7. C ommon i ndustrial o bjects implemented by vacon ® 100 family 7.1 cip common required objects 7.1.1 identity object, class 0x01 the identity object provides identi...
Page 28
7 vacon • 26 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.1.1.1 instance attributes instance attribute “vendor id” this number is assigned to vendors of cip devices by the odva user organization. The vendor id for vacon® is 01bb h (443...
Page 29
Common industrial objects implemented by vacon® 100 family vacon • 27 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 the vacon® 100 family ac drives drive implement bits 0, 2, and 4-11 according to the specification (extended device status values 1, 4 and 8 to 15 are not used by vaco...
Page 30
7 vacon • 28 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 instance attribute “product name” this attribute contains human readable name identification for this instance. The value returned is “vacon® 100”. 7.1.1.2 services instance servi...
Page 31
Common industrial objects implemented by vacon® 100 family vacon • 29 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 table 14. Connection manager object class name connection manager object class identifier 6 class attributes id access rule name datatype description 1 get revision ui...
Page 32
7 vacon • 30 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.1.3.1 services instance service “forward open” the forward open service is used to open a connection to a target device. If the path between devices consists of multiple links, ...
Page 33
Common industrial objects implemented by vacon® 100 family vacon • 31 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 7.1.4.1 instance attributes instance attribute “status” this attribute presents the status of the tcp/ip network interface. Instance attributes id access rule name dat...
Page 34
7 vacon • 32 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 instance attribute “configuration capability” this attribute presents the capability flags (that is, the support for the optional network configuration capability) of the tcp/ip n...
Page 35
Common industrial objects implemented by vacon® 100 family vacon • 33 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 instance attribute “configuration control” this attribute allows control of the tcp/ip network interface configuration. When using the configuration control attribute,...
Page 36
7 vacon • 34 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 configuration obtained through this channel. Until the bootp/dhcp reply is received, the values are 0. Changing the instance configuration is not allowed when the i/o connection i...
Page 37
Common industrial objects implemented by vacon® 100 family vacon • 35 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 instance attribute "last conflict detected" this attribute contains information of the last ip address conflict. The content of this attribute can be resetted by writi...
Page 38
7 vacon • 36 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.1.5 ethernet link object, class 0xf6 ethernet link object provides interface to ethernet link counters and attributes. With this object, user can retrieve for example link speed...
Page 39
Common industrial objects implemented by vacon® 100 family vacon • 37 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 7.1.5.1 instance attributes instance attribute “interface speed” the attribute reveals the currently used speed in the interface. The speed is announced as an integer ...
Page 40
7 vacon • 38 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 instance attribute “physical address” the attribute reveals the mac layer address of the physical interface. Instance attribute “interface counters” the attribute is a collection ...
Page 41
Common industrial objects implemented by vacon® 100 family vacon • 39 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 instance attribute “media counters” the attribute is a collection of counters related to the ethernet physical interface. In errors udint inbound packets received on t...
Page 42
7 vacon • 40 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 instance attribute “interface type” the attribute indicates the type of the ethernet interface, i.E. Twisted-pair cable, optical fiber, device-internal etc. The ac drive will alwa...
Page 43
Common industrial objects implemented by vacon® 100 family vacon • 41 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 7.2 objects present in an ac/dc drive 7.2.1 assembly object, class 0x04 the assembly object groups (or assembles) the attribute values into a single block of data. 7.2...
Page 44
7 vacon • 42 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.2.2.1 instance attributes instance attribute “motortype” the vacon® 100 family ac drives support values 3 (permanent magnet synchronous motor) and 7 (squirrel cage induction mot...
Page 45
Common industrial objects implemented by vacon® 100 family vacon • 43 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 instance attribute “polecount” this attribute allows reading and writing of the number of poles in the motor. The unit of the attribute is 1. Instance attribute “base ...
Page 46
7 vacon • 44 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.2.3.1 instance attributes instance attribute “run1” this attribute affects the run/stop behavior of the drive. See table 31. Instance attribute “run2” this attribute affects the...
Page 47
Common industrial objects implemented by vacon® 100 family vacon • 45 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 instance attribute “netctrl” this attribute allows the network to request the run/stop control to be assigned to the network. If the bit is 0, given control word is no...
Page 48
7 vacon • 46 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 instance attribute “running2” this attribute is used to describe the run state of the drive. The value of the attribute is 1, if one of the below conditions are fulfilled: • the “...
Page 49
Common industrial objects implemented by vacon® 100 family vacon • 47 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 7.2.3.2 services instance service “reset” the control supervisor object has a instance service named “reset” which has the service code 05 h . The service resets the d...
Page 50
7 vacon • 48 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.2.4 ac/dc drive object, class 0x2a the ac/dc drive object models the functions specific to an ac or dc drive. Table 34. Ac/dc drive object class name ac/dc drive object class id...
Page 51
Common industrial objects implemented by vacon® 100 family vacon • 49 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 instance attributes id access rule name data- type description 3 get/set atreference bool true, when drive actual at reference (speed or torque reference) based on mod...
Page 52
7 vacon • 50 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.2.4.1 instance attributes instance attribute “atreference” this attribute indicates whether the actual value is at the reference value (e.G. The drive actual speed is the same a...
Page 53
Common industrial objects implemented by vacon® 100 family vacon • 51 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 instance attribute “speedactual” this attribute allows reading of the speed actual value. The unit of the attribute must be (rpm / 2 speedscale ), where the speedscale...
Page 54
7 vacon • 52 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 instance attribute “torquescale” the torqueactual and torqueref values are scaled according to the value of this attribute. The default value is 0 d . The largest allowed value fo...
Page 55
Common industrial objects implemented by vacon® 100 family vacon • 53 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 the vacon® 100 family ac drives also support an old method from the optcq option board of reading/writing id values when the plc supports only 8 bit instance attribute...
Page 56
7 vacon • 54 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 the old format of the message is as follows (optcq option board): 7.3.2 assembly instance selector object, class 0xbe the assembly instance selector object is a vendor-specific ob...
Page 57
Common industrial objects implemented by vacon® 100 family vacon • 55 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 7.3.2.1 instance attributes instance attribute “inputinstance” this attribute shows the currently active (or what was last used) input assembly instance id. Instance a...
Page 58
7 vacon • 56 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.3.3 motor control mode object, class 0xa1 the motor control mode object is a vendor-specific object available in the vacon® 100 family ac drives which more clearly indicates to ...
Page 59
Common industrial objects implemented by vacon® 100 family vacon • 57 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 controlmode and feedbackmode combinations controlmode and feedbackmode combinations depends on used drive and application. Check the actual mode support from the ac dr...
Page 60
7 vacon • 58 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 when the following values are set to the ac/dc drive object “drivemode” attribute, the motor control mode object attributes are set to the following values: *feedback mode does no...
Page 61
Common industrial objects implemented by vacon® 100 family vacon • 59 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 7 7.3.4.1 changes from revision 1 to revision 2 the attributes faultcode and faultday were changed from 8 bit to 16 bit. 7.3.4.2 class attributes class attribute “revisi...
Page 62
7 vacon • 60 common industrial objects implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 7.3.4.3 instance attributes instance attribute “faultcode” the value returns the fault code of a fault entry which is represented by the fault history object instance. Instance at...
Page 63
Assembly instances implemented by vacon® 100 family vacon • 61 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 8 8. A ssembly instances implemented by vacon ® 100 family 8.1 odva i/o assembly instances for ac/dc drive the vacon® 100 family ac drives support the output assembly instances...
Page 64
8 vacon • 62 assembly instances implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 the process data out is mapped according to the table below. The speed reference is updated to the drive only when the netref bit is set to 1. The torque reference is updated to the driv...
Page 65
Assembly instances implemented by vacon® 100 family vacon • 63 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 8 8.1.1 odva output instances 8.1.1.1 assembly instance 20 – basic speed control output 8.1.1.2 assembly instance 21 – extended speed control output 8.1.1.3 assembly instance 2...
Page 66
8 vacon • 64 assembly instances implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 8.1.2 odva input instances 8.1.2.1 assembly instance 70 – basic speed control input table 61. Drive mode selection in process control drive mode process reference mapping 0 processdatain...
Page 67
Assembly instances implemented by vacon® 100 family vacon • 65 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 8 8.1.2.2 assembly instance 71 – extended speed control input 8.1.2.3 assembly instance 73 – extended speed and torque control input 8.1.2.4 assembly instance 75 – extended pro...
Page 68
8 vacon • 66 assembly instances implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 8.2 vendor-specific i/o assembly instances the vacon® 100 family ac drives support the assemblies 101, 111, 128, 131, 141, 107, 117, 127, 137 and 147. The instances 101 and 107 use the c...
Page 69
Assembly instances implemented by vacon® 100 family vacon • 67 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 8 8.2.1.2 assembly instance 111 table 70. Instance octet bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 111 (length 20) 0 fbfixedcontrolword (low octet) 1 fbfixedcontrolword (high oct...
Page 70
8 vacon • 68 assembly instances implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 8.2.1.3 assembly instance 128 the contents of the assembly are otherwise identical to the output assembly 111, except that the second octet of the assembly is the high octet of fbgeneral...
Page 71
Assembly instances implemented by vacon® 100 family vacon • 69 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 8 8.2.1.4 assembly instance 131 8.2.2 vendor input instances 8.2.2.1 assembly instance 107 table 72. Instance offset octet 0 octet +1 octet +2 octet +3 131 (length 40) 0 fbfixe...
Page 72
8 vacon • 70 assembly instances implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 8.2.2.2 assembly instance 117 table 74. Instance octet bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 117 (length 34) 0 fbfixedstatusword (low octet) 1 fbfixedstatusword (high octet) 2 fbspeeda...
Page 73
Assembly instances implemented by vacon® 100 family vacon • 71 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 8 8.2.2.3 assembly instance 127 the contents of the assembly are otherwise identical to the input assembly 117, except that the second octet of the assembly is the high octet o...
Page 74
8 vacon • 72 assembly instances implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 8.2.2.4 input assembly instance 137 8.3 mapping of standard output assemblies onto vacon® data this section specifies how the data in the standard output assemblies are mapped into vacon...
Page 75
Assembly instances implemented by vacon® 100 family vacon • 73 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 8 8.3.4 direction bit in vacon® fbfixedcontrolword if the “runrev” bit in an output assembly has the value 1, and the “runfwd” bit in the assembly has the value 0, then the “di...
Page 76
8 vacon • 74 assembly instances implemented by vacon® 100 family tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 running2 bits depends further on the “direction indication” bit 2 of the vacon® fbfixedstatusword as follows: 8.4.4 direction indication bit in vacon® fbfixedstatusword see chapter 8.4.3...
Page 77
Appendix 1 - vendor control and status word descriptions vacon • 75 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 9 9. Appendix 1 - vendor control and status word descriptions 9.1 fbfixedcontrolword and fbgeneralcontrolword the control word is composed of 32 bits. Fbfixedcontrolword c...
Page 78
9 vacon • 76 appendix 1 - vendor control and status word descriptions tel. +358 (0) 201 2121 • fax +358 (0)201 212 205 9.2 fbfixedstatusword and fbgeneralstatusword the status word is composed of 32 bits. Fbfixedstatusword consist of the first 16 bits. Fbgen- eralstatusword consist of the remaining ...
Page 79
Appendix 2 - fieldbus parametrisation vacon • 77 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 10 10. Appendix 2 - fieldbus parametrisation the following chapter describes briefly how to parametrise the ac drive in order for the motor to be controllable via fieldbus. These instruction...
Page 80
Appendix 3 - lwip licence vacon • 78 24-hour support +358 (0)201 212 575 • email: vacon@vacon.Com 11 11. Appendix 3 - lwip licence license for lwip copyright (c) 2001, 2002 swedish institute of computer science. All rights reserved. Redistribution and use in source and binary forms, with or without ...
Page 81
Document id: dpd01045d rev. D sales code: doc-100etherip+dluk vacon ltd member of the danfoss group runsorintie 7 65380 vaasa finland www.Danfoss.Com.