Vari Lite VL3000 Series User Manual - page 26
VARI
❋
LITE® - VL3000™ S
ERIES
L
UMINAIRE
U
SER
’
S
M
ANUAL
8
20 - Au g- 03
0 2 . 9 6 7 8 . 0 0 0 1 A
Power and Data Cabling Requirements
Power
The luminaire requires standard AC power distribution from 200-240 VAC, 50/60 Hz. Ten amps will
be required.
Depending on the application, the luminaire’s AC input cable may require a different connector. If
required, install a new connector meeting your requirements using the following wire color code:
* International (Harmonized) Standard
WARNING: DO NOT connect to three-phase Delta service in countries with 240 volt power.
Note: The lamp will not strike below 180 volts RMS.
For single-phase power at 200-240 volts RMS:
For three-phase power at 208 volts RMS:
Wire*
Connection
Green/Yellow
AC Ground
Blue
AC Neutral
Brown
AC Line
Connection
Pin
AC Neutral
X
AC Line
Y
Ground (Earth)
G
Connection
Pin
Phase 1
X
Phase 2
Y
Ground (Earth)
G
X
Y
G
X
Y
G