Vari Lite VL3000 Series User Manual - page 72
VARI
❋
LITE® - VL3000™ S
ERIES
L
UMINAIRE
U
SER
’
S
M
ANUAL
5 4
20 - Au g- 03
0 2 . 9 6 7 8 . 0 0 0 1 A
Troubleshooting
Error Messages
If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu
Display will cycle through any applicable error message(s) until the end of the list is reached. To
review the error messages again, it will be necessary to access them using the Status function.
To access error messages:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until Fixture appears. Press [Enter].
Step
3. Press [Up]/ [Down] arrows to access Status. Press [Enter]. (Display will now scroll
through any error messages or display OK if no errors.)
Table A-1: Error Messages
Display
Message
OK
No Errors Found
Pan/No Sens
Pan sensor not found.
Pan/Encoder/Fail
Pan encoder failure.
Tilt/No Sens
Tilt sensor not found.
Tilt/Encoder/Fail
Tilt encoder failure.
Index1/No Sens
Gobo 1 Index sensor not found.
Gobo1/No Sens
Rotating Gobo 1 sensor not found.
Index2/No Sens
Gobo 2 Index sensor not found.
Gobo2/No Sens
Rotating Gobo 2 sensor not found.
Index3/No Sens
Gobo 3 Index sensor not found.
Gobo3/No Sens
Rotating Gobo 3 sensor not found.
Dimmer/No Sens
Dimmer sensor not found.
Blue/No Sens
Blue sensor not found.
Amber/No Sens
Amber sensor not found.
Magenta/No Sens
Magenta sensor not found.
ColWheel/No Sens
Color wheel sensor not found.
CTO/No Sens
CTO sensor not found.
Zoom/No Sens
Zoom sensor not found.
Edge/No Sens
Edge sensor not found.