Wacker Neuson RCP 20 Operator's Manual - Rcp
Manual is about: Cutting machine with interchangeable head
of
62
RCP
Operation
27
Running the machine in idle
Note:
If the machine is exposed to an ambient temperature under 5 °C, warm
up in idle approx. 1 minute before beginning work on the machine.
1. Set the pressure release lever in the Release/Idle position.
2. Press and hold ON/OFF switch.
The machine runs in idle.
3. Release the ON/OFF switch to turn off.
Item
Designation
1
Cutting operation ("I")
2
Release/Idle ("0")