Wacker Neuson RCP 20 Operator's Manual - Introduction
Manual is about: Cutting machine with interchangeable head
of
62
Introduction
7
2.2
WACKER representative
Depending on your country, your WACKER representative is your WACKER
Service, your WACKER affiliate or your WACKER dealer.
You can find the addresses in the Internet at
www.wackergroup.com
.
The addresses of the WACKER main locations are located at the end of this op-
erator's manual.
2.3
Described machine parts
This operator's manual is valid for different machine parts from a product range.
Therefore some figures can differ from the actual appearance of your machine.
It is also possible that the descriptions include components which are not a part
of your machine.
Details for the described machine types can be found in the chapter Technical
Data.