Wacker Neuson RCP 20 Operator's Manual - Rcp
Manual is about: Cutting machine with interchangeable head
of
62
RCP
Maintenance
35
8.2.4
Changing the hydraulic oil
Change hydraulic oil when it is lukewarm. The oil then flows easier.
Draining out the hydraulic oil
Item
Designation
1
Screw plug
2
Oil filler neck
WARNING
Hot hydraulic oil.
Injury by scalding.
f Do not open the screw plug on the oil filler neck as long as the hydraulic oil
is hot.
f Let machine cool off.
CAUTION
Hydraulic oil under pressure.
Squirting hydraulic oil can penetrate the skin.
f Only unscrew the screw plug on the oil filler neck if the thrust bolt is com-
pletely extended.
f Wear safety glasses and protective gloves.