DL manuals Wacker Neuson Cutter RCP 20 Operator's Manual Wacker Neuson RCP 20 Operator's Manual - Rcp Manual is about: Cutting machine with interchangeable head 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 Page of 62 Go Download Print this page Bookmark us RCP Accessories 47 Fastening the bending head 1. Put the collar on. 2. Turn and tighten the fastening screw on the collar. 3. Tighten the die with the fastening screw, spring washer and nut onto the thrust bolt. Item Designation 1 Collar 2 Nut 3 Die 4 Fastening screw 5 Thrust bolt 6 Fastening screw « ‹ Prev44454647484950Next › »