Wacker Neuson RCP 20 Operator's Manual - Rcp
Manual is about: Cutting machine with interchangeable head
of
62
RCP
Accessories
49
Changing the molding piece
1. Screw out the fastening screw.
2. Remove molding piece.
3. Place another molding piece on. When doing so make sure that the slanted
edge on the molding piece is aligned downwards.
4. Tighten the molding piece with the fastening screw.
Bending the workpiece
Item
Designation
1
Molding piece
2
Fastening screw
WARNING
Movable tool.
Body parts could be crushed.
f Do not touch the bending head when the motor is running.
WARNING
Injuries from insufficiently guided or uncontrolled machine.
Body parts could be crushed.
f Hold the machine with one hand and guide the workpiece into the bending
head with the other hand.