WaterRower M1 SERIES Owner's Manual - page 9
of
17
16
17
sTep 11
Insert the heelrests into footboard cover plates.
sTep 12
Undo the Dolley Wheel Assembly and fix it to the front of the Rail in the order
shown below and tighten. Note: the Wheel goes on the outside of the Rail.
sTep 13
stand the WaterRower upright. Release the Recoil Belt which is fastened to
the bracket at the base of the machine. Ensure that the Recoil Belt is passing
over all Guide Pulleys. Connect the Bungee to the Recoil strap by hooking the
Bungee Hook through the Recoil Belt D-ring.
Bungee
Recoil
Belt
Congratulations, your WaterRower is now ready for use!