WEG CFW100 User Manual - page 26
Other manuals for CFW100:
Installation And Operation Manual, User Manual
of
120
CFW100 | 25
Keypad (HMI) and Basic Programming
E
ng
lis
h
NOTE!
When the inverter is in the fault state, the main display indicates the number of
the fault in the format
Fxxx. Navigation is allowed after activation of key
.
NOTE!
When the inverter is in the alarm state, the main display indicates the number of
the alarm in the format
Axxx. The navigation is allowed after the activation of key
; thus, the indication
“A” goes to the unit of measurement display until the
situation causing the alarm is solved.
NOTE!
A list of parameters is presented in the quick reference of the parameters. For further
information about each parameter, refer to the CFW100 programming manual.