WEG CFW100 User Manual - page 3
Other manuals for CFW100:
Installation And Operation Manual, User Manual
of
120
2 | CFW100
Summary of Revisions
E
ng
lis
h
The information below describes the revisions made to this manual.
Revision
Description
Chapter
00
First edition
-
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the factory setting (check
P403), it is necessary to set:
P204 = 5 for 60 Hz;
P204 = 6 for 50 Hz.
It is only necessary to set these parameters once.
Refer to the programming manual of the CFW100 for further details about the
programming of parameter P0204.