WEG CFW100 User Manual - page 30
Other manuals for CFW100:
Installation And Operation Manual, User Manual
of
120
CFW100 | 29
First Time Power-Up and Start-Up
E
ng
lis
h
5.2.2 V/f Type of Control (P202 = 0)
Seq
Display Indication/Action
Seq
Display Indication/Action
1
2
Initialization mode.
Press key
to enter the first level of the
parameterization mode.
Press keys
or
to select parameter
P202.
3
4
Press key
if you need to change the content
of “P202 – Type of control” for P202 = 0 (V/f).
Press key
to select parameter P401.
If necessary, change the content of parameter
“P401 – Motor Rated Current” according to
the nameplate.
Press key
for the next parameter.
5
6
If necessary, change the content of
“P402 - Motor Rated Speed”.
Press key
for the next parameter.
If necessary, change the content of
“P403 – Motor Rated Frequency”.
Figure 5.3: Sequence for V/f control