WEG CFW100 User Manual - page 36
Other manuals for CFW100:
Installation And Operation Manual, User Manual
of
120
CFW100 | 35
Troubleshooting and Maintenance
E
ng
lis
h
6.5 CLEANING INSTRUCTIONS
When it is necessary to clean the inverter, follow the instructions below:
Ventilation system:
Disconnect the inverter power supply and wait for 10 minutes.
Remove the dust from the cooling air inlet by using a soft brush or cloth.
Remove the dust from the heatsink fins and from the fan blades by using compressed air.
Localization of the fan
in the product
Cable disconnection
Release the latches to
remove the fan
3
1
2
Figure 6.1: Removal of the heatsink fans