XENO XNR44P User manual - 1.2 System Startup
9 | Chapter 1 : NVR
1.2 System Startup
1.2.1 System Startup
After connecting peripheral devices such as cameras, monitors and a mouse to the NVR, power up the NVR by connecting
DC12V 3A adaptor to the power jack on the rear panel. The boot logo will display as shown below. Please wait until the boot
process completes. Optional PoE needs independent power input of 48VDC.
Login with ‘User Name’ at the login window which will appear as shown below.
There is only one Administrator Account configurable in the NVR system. It is assigned with an unchangeable User ID marked
as ‘admin’. The default password is empty (No Password). Administrator account has full access to the NVR and its
configurable parameters. The Administrator Account also has the ability to create new users and to assign rights to the new
user accounts. Those new users created by ‘admin’ account can also login with a specific password set by ‘admin’ account.
N
OTE
Do not forget the administrator’s password that was set for the first time. In case the password is lost,
contact your vendor.
N
OTE
The mouse is included. In case you need to replace it, it is highly recommended to choose well-known
major brands such as DELL, MICROSOFT, LOGITECH, or SAMSUNG.