XENO XNR44P User manual - 3.2 Quick Setup
User’s Manual | 12
3.2 Quick Setup
3.2.1 NVR Setup
Quick Setup is specially designed to enable easier & faster for the major NVR settings such as NVR network setup, IP camera
search & registration. When the NVR boots up and login, the Quick Setup will be operated automatically. Quick Setup pop-up
is controllerable in main menu. There are two ways for connecting to network setup: DHCP or Static IP.
The fatory default setting is as followings:
[WAN Port]
IP Address: 192.168.1.160
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
[Local Port: Switch Setting]
IP Address: 10.10.1.1
Subnet Mask: 255.255.255.0
Gateway: 10.10.1.1
3.2.2 IP Camera Connection
When the IP cameras are connected to the NVR, you can search the connected cameras by clicking ‘Search’ button.
Once the cameras are discovered, check the box of each camera and click the ‘Add to Camera List’ button. Then the
cameras will be shown in the list at the bottom. Click ‘Save’ button.
N
OTE
In case of requiring the User ID and Password for certain IP cameras for proper registration, please
click the ‘Edit’ button. The User ID and Password for each IP camera should be the same one which
are used for web configuration page of the camera.