XENO XNR44P User manual - page 16
User’s Manual | 14
3.3.3 Icons Description
The live mode display’s icons or messages will be indicated on the screen to indicate the system mode or status.
Below is the icon categories that are indicated on the monitor.
Icon to be shown
at Left-upper corner on each channel screen
Icon to be shown
at Left-bottom corner on full screen.
Continuous Recording
Sequence display on
Motion Detection Recording
Digital zoom on
Sensor Activating Recording
Audio Channel
Motion Detection + Sensor Activating
Recording
Instant Recording (Emergency Rec)
Continuous Recording + Motion Recording
The sliding menu for display will be appeared when mouse cursor moves into bottom and right click of mouse enables to
access a pop-up-menu.
means “Instant (emergency) recording”, which is useful to urgently start recording. In emergency recording, the system
follows the instant record settings. The default settings for instant record are maximum performance recording of streaming
from IP camera and applied for all channels.
You can click the right-forwarded arrow button
to automatically playback the latest video clip.
means the HDD usage percentage by video recording. If it shows 60%, then 60% of HDD space has been used up
for recording.
N
OTE
If u cannot find any coloured-mark in the top right corner of the live screen mode, then it means that the
system does not record any image. In this case, you need to check recording schedule or camera of the
main setup menu.