XENO XNR44P User manual - page 70
User’s Manual | 68
No
Item
Description
1
Main Toolbar
(Setup Tab)
The Main Toolbar has three (3) selectable tabs named "Main", "Export" and
"Setup". In the Setup tab, there are CMS setup and Remote setup.
2
Main Toolbar
(Export Tab)
In the Export tab, able to save JPEG, AVI and Print the images.
3
Main Toolbar
(Main Tab)
In the Main tab, able to connect Live and Search, disconnect, change display
mode and sequence, Panorama Search and Thumbnail Search.
4
Site List Panel
All of the registered sites in the setup tab are shown in the site list. Simply drag
and drop the desired site to the display screen to connect to the site.
5
PTZ Panel
PTZ camera control is not available on the NVR system.
6
Search Panel
In the Search mode, the recording information per each channel will be
displayed, when a specific date is selected in the calendar.
7
Display Panel
This is the area where live view and search view are displayed.
8
Event Search Panel
CMS also can receive all of events from DEVICE, and they are listed in this
panel. An event data can be searched by double-clicking on an event.
9
Information Panel
Shows the current time and site information of the selected channel.
10
Favorite Panel
Create favorite site for quick access to the sites frequently viewed.
6.4.3 MAIN TOOLBAR (SETUP)
No
Item
Description
1
CMS Setup
Register sites, setup for user authority, and setup other CMS properties.
2
Remote Setup
Access the setup menu of DEVICE remotely and change the settings.
3
Windows Exit
Minimize/Maximize the CMS Window or close the CMS program.