XENO XNR44P User manual - 4.4 Alarm
Manual is about: 4 Channel NVR
with PoE
of
139
45 | Chapter 1 : NVR
4.4 Alarm
4.4.1 Sensor
You can select the sensor input between NVR and supported network cameras. Mapping is only available for either of
Network camera sensor or the local sensor of NVR on the same channel.
Type
OFF, N/O (Normal Open), N/C (Normal Close)
Cam
Select the associated camera channel.
Notify
You can select how to be alerted when a sensor is activated by pressing the “NOTIFY” button. The system can
generate a buzzer sound and/or make a pop-up screen for the camera in alarm.
C
AUTION
Relay contact can handle up to 24VDC/1A(or 125VAC/0.5A) of other devices. If connected to a circuit
that is over 24VDC/1A(or 125VAC/0.5A), the system may experience problems.