XENO XNR44P User manual - page 18
User’s Manual | 16
select “Zoom-In size(x1.5, x2, x2.5 or x3)” on zoom pop-up menu. After selecting, move a yellow box by using the mouse to
drag in the desired area of the camera to zoom. In order to go back to live display mode, please click “Zoom-In size” again.
When a camera is disconnected, a warning sound may be generated depending on the system settings. You can set the
warning sound from ‘Network Failure’ section on the System Alarm of the Alarm menu.
Admin level can set different level of authorization for each user. If a certain user is not allowed to view a certain live and
playback channel, then no image appears on the display screen. To setup, move to System menu and click ‘User’.
The ‘User Add/Edit’ popup page will appear like the screenshot below when admin level clicks the button ‘Add’ at the right
bottom. If Boxes are checked, The user can have an authorization to get access to each function and section.
3.3.5 Alarm Status
Intuitively, System alarm and Camera alarm will be displayed in icons. System alarm includes HDD S.M.A.R.T, Fan failure,
Disk Error and No Disk and Recording failure. Camera alarm displays network connection status, motion event and sensor
event from connected cameras. However, motion and sensor from camera will only be displayed when network camera
supports the motion and sensor.
[Alarm Deactivated] [Alarm Activated]