Xerox 850DP - Phaser Color Solid Ink Printer Cleaning Instructions Manual - page 8
Other manuals for 850DP - Phaser Color Solid Ink Printer:
System Introduction, Supplementary Manual, Operator's Manual, Operator's Manual, Release Note, Operator's Manual, Supplementary Manual, Supplementary Manual, Supplementary Manual, Setup Manual, Upgrade Manual, Manual, Administrator's Manual, User Manual, Release Note, Release Note, Installation Instructions, User Manual
Manual is about: Controller Software Version 10.0
of
9
Cleaning Instructions
7
Cleaning Phaser® 850 Printers
3.
Remove the maintenance drawer (A) from the printer.
4.
The top of the media-pick roller is behind the black rubber paper-path rollers. To clean the top
surface of the media-pick roller:
d.
Use a prepackaged alcohol-soaked cloth.
e.
Scrub the top surface of the media-pick roller thoroughly.
If the wipe becomes dirty,
discard it and use another.
5.
Replace the maintenance drawer (A) in the printer.
6.
Close the front cover.
7.
To access the bottom of the media-pick roller reach into the media tray slot. Use a prepackaged
alcohol-soaked cloth.
Scrub the bottom surface of the pick roller thoroughly
.
8.
Replace the upper media tray in the printer.
9103-09
9103-20
9103-21