Xerox DocuMate 3125 User Manual - page 118
Scanning from TWAIN and WIA
Xerox
®
DocuMate
®
3125
User’s Guide
7-110
When you scan, any settings you adjusted are automatically saved to the
Last used settings
preset. These settings are not retained in a preset until you click
Save
in the main interface to
save the settings to the current preset, or save them to a new preset using the
Save as
dialogue.
If you select a different preset from the
Presets
list before scanning, the changes you made will
be discarded.
Scan Regions
You can use the preview window to create custom scan regions for the scanner to use for
scanning. For example, if you want to scan only a specific area of the image, you can move and
resize a scan region to focus only on the area you want to scan. The final image will be only the
size of the region you set.
Important
: do not change the page size for the scanned image after you create custom
regions. When you have set a custom region in the preview window, the page size field will
display “user defined” indicating you have specified one or more custom regions for scanning.
Changing the page size after you create a custom region discards the custom regions and sets a
single scan region to the size you selected in the page size list.
Creating custom scan regions:
1.
Select the preset you want to use for scanning.
2.
In the main interface click
Preview
to open the preview window.
If no previous custom scan regions have been created for the preset you selected, the
preview window will have a single scan region that is the page size for the current preset.
This region will be labeled number 1 and be displayed as an outline in the preview area.
3.
Place an item in the scanner and then click
Get preview
.
4.
The scanner scans and displays a sample image.