Xerox DocuMate 3125 User Manual - page 152
Scanning from TWAIN and WIA
Xerox
®
DocuMate
®
3125
User’s Guide
7-144
•
Reset device
—click this button to revert the scanner hardware back to the scanner’s
firmware defaults. As this option resets the scanner hardware, you will not see a change in
the interface unless the power save time has been changed. Clicking this button includes
returning the power save time-out to the default setting.
Scanner maintenance:
•
Counters
—click the reset button next to the counter you want to set back to 0.
You can use this option to monitor the number of scans completed since the last time a
part has been replaced.
Hardware Properties and Interface
Behavior
You can use the scanner’s properties page to keep track of scanner maintenance, change some
of the hardware options, configure the scanner interface behavior, and adjust application
options that may be available for your scanner.
To open the scanner hardware properties page:
•
Windows 7 and 8
—from the Windows Control Panel, open
Hardware and Sound
and then
Devices and Printers
.
Right-click on the scanner and then select
Scan properties
from the list. Click
Yes
if you are
prompted by the Windows User Account Control to confirm that you want make changes
to the system settings.
•
Windows Vista
—from the Windows Control Panel, open
Hardware and Sound
and then
Scanners and Cameras
.
Click on the scanner icon then click on the
Properties
button. Click
Yes
if you are prompted
by the Windows User Account Control to confirm that you want make changes to the
system settings.
•
Windows XP
—from the Windows Control Panel when in category view, open
Printers and
Other Hardware
and then
Scanners and Cameras
.
Right-click on the scanner and then select
Properties
from the list.