Xerox VersaLink B405 User Manual - page 149
8
Troubleshooting
General Troubleshooting
This section contains procedures to help you locate and resolve problems. Resolve some problems by
simply restarting the printer.
Printer Does Not Power On
Solutions
Probable Causes
At the printer control panel, press the Power/Wake
button. For details, refer to
.
The power switch is not turned on.
Power off the printer, and plug the power cord securely
into the outlet.
The power cord is not plugged into the outlet correctly.
Power off the printer, then unplug the power cord and
wait 30 seconds. Plug the power cord into the outlet se-
curely, then press the Power/Wake button.
The printer requires a full reset.
Something is wrong with the outlet connected to the
printer.
• Plug another electrical appliance into the outlet and
check if it operates properly.
• Try a different outlet.
Use a power source with the specifications listed in the
The printer is connected to an outlet with a voltage or
frequency that does not match the printer specifications.
Caution
Plug the three-wire cord with grounding prong directly into a grounded AC outlet.
8-1
Xerox
®
VersaLink
®
B405 Multifunction Printer
User Guide