Xerox VersaLink B405 User Manual - page 152
Solutions
Probable Causes
Determine if a print spooler or a computer sharing the
printer is buffering all print jobs and then spooling them
to the printer. Spooling can slow print speeds. To test
the speed of the printer, print some information pages
such as the Demonstration Print. For details, refer to
. If the page prints at the rated speed
of the printer, there could be a network or printer install-
ation issue. For more help, contact the system adminis-
trator.
The way the printer was installed on the network could
be an issue.
Wait. No action needed.
The job is complex.
Change the print-quality mode in the print driver to
Standard.
The print-quality mode in the driver is set to Enhanced.
Document Prints from Wrong Tray
Solutions
Probable Causes
Application and print driver have conflicting tray selec-
tions.
1.
Check the tray selected in the print driver.
2.
Access the page setup or printer settings of the
application from which you are printing.
3.
Set the paper source to match the tray selected in
the print driver or set the paper source to Automat-
ically Select.
4.
Check that you have the latest print driver installed.
For details, go to
www.xerox.com/office/VLB405sup-
.
Note
To have the print driver select the tray, set the tray used
as the paper source to Auto Selection Enabled.
Automatic 2-Sided Printing Problems
Solutions
Probable Causes
Ensure that you are using a supported paper size and weight for 2-sided
printing. Envelopes, cardstock, and labels cannot be used for 2-sided
printing. For details, refer to
Supported Paper Types and Weights for
Unsupported or incorrect paper.
Ensure that your printer supports automatic 2-sided printing. For details,
refer to
Printer Configurations and Options
.
Your printer model is not configured with
automatic 2-sided printing.
In the print driver Printing Options tab, select 2-Sided Print.
Incorrect setting.
Xerox
®
VersaLink
®
B405 Multifunction Printer
8-4
User Guide
Troubleshooting