1. DL manuals
  2. Xerox
  3. Software
  4. Wide Format 6030
  5. User Manual

Xerox Wide Format 6030 User Manual

Manual is about: Wide Format Copier/Printer

Summary of Wide Format 6030

  • Page 1

    Version 2.0 august 2007 xerox 6030/6050/6050a wide format printer user guide 701p47273 downloaded from manualsprinter.Com manuals.

  • Page 2

    Xerox corporation global knowledge & language services 800 phillips road bldg. 845-17s webster, ny 14580 copyright © 2007 xerox corporation. All rights reserved. Printed in the united states of america. Copyright protection claimed includes all forms and matters of copyrighted material and informati...

  • Page 3

    Preface thank you for using the xerox 6030/6050/6050a wide format copier/printer user guide (hereinafter known as 6030/6050/6050a wide format). This user guide describes the basic operations and the detailed functions of the xerox 6030/6050/6050a wide format copier, printer, and integrated scanner. ...

  • Page 4

    Preface conventions this user guide uses the following symbols and conventions: key indicates the keys on the keyboard. Press the key. [ ] indicates the menus and display items on the screens. Select either the [on] or [off] buttons to display [job name], [owner], and [reason] in that order. " " ind...

  • Page 5

    Safety notes i safety notes read these safety notes carefully before using this product to ensure you operate the equip- ment safely. Your xerox product and recommended supplies have been designed and tested to meet strict safety requirements. These include safety agency approval, and compliance wit...

  • Page 6

    Safety notes ii to be limited or special mitigation measures taken. Warning shielded cables must be used with this equipment to maintain compliance with council directive 89/336/eec. Electricity at work regulations the electricity at work regulation 1989 came into force in england and wales on the 1...

  • Page 7

    Safety notes iii question: is xerox equipment safe? Answer: all xerox equipment supplied by xerox and their authorized distributors conform to all relevant safety legislation and standards. Question: is the xerox equipment in my premises safe? Answer: all xerox equipment supplied by xerox and its au...

  • Page 8

    Safety notes iv please note: you must ensure that your xerox equipment is safe at all times electrical supply this product shall be operated from the type of electrical supply indicted on the product 's data plate label. If you are not sure that your electrical supply meets the requirements, please ...

  • Page 9

    Safety notes v ensure that the power connection for your machine satisfies these require- ments • use only the power cord supplied with this equipment. • the socket outlet shall be installed near the equipment and shall be easily accessible. • plug the power cord directly into a grounded electrical ...

  • Page 10

    Safety notes vi disconnect device the power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-in device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet. Xerox equipment and supplies have be...

  • Page 11

    Safety notes vii • never remove covers or guards that are fastened with screws. There are no operator serviceable areas within these covers. • never locate the equipment near a radiator or any other heat source. • never push objects of any kind into the ventilation openings. • never override or "che...

  • Page 12

    Safety notes viii uct contains lamp(s) with mercury*, and may contain lead*, perchlorate* and other materials whose disposal may be regulated due to environmental consider- ations. The presence of these materials is fully consistent with global regulations applicable at the time that the product was...

  • Page 13

    Safety notes ix canadian eme this class "a" digital apparatus complies with canadian ices-003. Cet appareil numérique de la classe "a" est conforme à la norme nmb-003 du canada. This product is certified by the following agencies using the safety standards listed. Agencystandard tuv rheinland of nor...

  • Page 14

    Regulatory information x regulatory information ce mark the ce mark applied to this product symbolizes xerox's declaration of conformity with the following applicable directives of the european union as of the dates indi- cated: january 1, 1995: council directive 72/23/eec amended by council directi...

  • Page 15

    Environmental compliance xi environmental compliance usa - energy star (6030/6050 wide format) as an energy star partner, xerox corporation/fuji xerox has determined that (the basic configuration of) **this** product meets the energy star guidelines for energy efficiency. The energy star and energy ...

  • Page 16

    Environmental compliance xii canada - environmental choice terra choice environmental services, inc. Of canada has verified that this product conforms to all applicable environmental choice ecologo requirements for mini- mized impact to the environment. As a participant in the environmental choice p...

  • Page 17

    Product recycling and disposal xiii product recycling and disposal usa xerox operates a world wide equipment take back and reuse/recycle program. Contact your xerox sales representative (1-800-ask-xerox) to determine whether this xerox product is part of the program. For more information about xerox...

  • Page 18: Usa

    Illegal copies and printouts xiv illegal copies and printouts usa congress, by statute, has forbidden the reproduction of the following subjects under certain circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making such reproductions. 1. Obligations or securities of...

  • Page 19

    Xv illegal copies and printouts 1. Stamps and other representatives of value, of whatever denomination, which have been or may be issued under any act of congress. 2. Adjusted compensation certificates for veterans of the world wars. 3. Obligations or securities of any foreign government, bank, or c...

  • Page 20: Canada

    Xvi illegal copies and printouts canada parliament, by statute, has forbidden the reproduction of the following subjects under certain circumstances. Penalties of fine or imprisonment may be imposed on those guilty of making such reproductions. 1. Current bank notes or current paper money. 2. Obliga...

  • Page 21: Other Countries

    Xvii illegal copies and printouts other countries copying certain documents may be illegal in your country. Penalties of fine or imprisonment may be imposed on those found guilty of making such reproductions. - currency notes - bank notes and cheques - bank and government bonds and securities - pass...

  • Page 22

    Xviii illegal copies and printouts downloaded from manualsprinter.Com manuals.

  • Page 23

    1 table of contents 1.1 product configurations .................................................................................................... 2 1.2 major components .......................................................................................................... 4 1.3 power on/off ......

  • Page 24

    2 chapter 3 printer setup 3.1 communication parameters .......................................................................................... 60 communication parameters definitions .................................................................... 60 3.2 communication parameter setup (printer...

  • Page 25

    3 split drawing ........................................................................................................... 134 message option ...................................................................................................... 136 printed copy.........................................

  • Page 26

    4 print a diagnostic report ........................................................................................ 192 4.8 manual feed printing .................................................................................................. 193 chapter 5 additional operations from the printer me...

  • Page 27

    5 message list (6030/6050 only) ............................................................................... 249 chapter 7 maintenance 7.1 loading toner.............................................................................................................. 252 chapter 8 problem solving 8.1 ...

  • Page 28

    6 downloaded from manualsprinter.Com manuals.

  • Page 29

    Chapter chapter 0 1 product overview downloaded from manualsprinter.Com manuals.

  • Page 30: 1.1

    2 1.1 product configurations the following product configurations and options are available for the xerox 6030/6050/6050a wide format printer and the xerox 6030/6050/6050a wide format copier/printer. Xerox 6030/6050/6050a wide format printer this unit is a printer only. Refer to the printer sections...

  • Page 31

    3 1.1 product configurations xerox 6030/6050/6050a wide format printer with scan system this unit features copier and printer functionality, plus the wide format scan system and the freeflow accxes ® controller. Xerox 6030/6050/6050a wide format options you may acquire additional hardware and softwa...

  • Page 32: 1.2

    4 1.2 major components major components: front ( *6030/6050 copier/printer only ) name function *1 document table documents to be scanned are inserted here. *2 setup screen (touch screen) used to set up copy jobs, map originals to the installed media, display messages and procedures, and provide tro...

  • Page 33

    5 1.2 major components major components: rear ( *6030/6050 copier/printer only ) *10 scanner power switch switches the power to the scanner on and off. Name function 1 toner supply port the toner is refilled through this port. Name function *1 document ejection port documents exit the scanner from t...

  • Page 34

    6 *4 remote switch a selector switch that enables the user to switch the power to both the scanner and the printer on and off from the main power switch. *5 interface connector the connector to which the printer is connected. *6 serial port connector used by the service representative for maintenanc...

  • Page 35: 1.3

    7 1.3 power on/off 1.3 power on/off the scanner and the printer are each equipped with a power switch. The circuit breaker switch must be in the on position to switch the printer and scanner power on and off. No power is consumed when the circuit breaker switch is in the off position, even though th...

  • Page 36

    8 3 press power button on accxes ® controller. Powering off 6030/6050 switch off the power following the steps below. 1 switch off the main power switch. 2 switch off the scanner power switch. 3 switch the circuit breaker switch to the off position. The 6050a will not operate unless accxes controlle...

  • Page 37

    9 1.3 power on/off powering off 6050a switch off the power following the steps below. 1 press the 2 press > twice to display the utilities menu option. 3 press the > button. 4 press > once to display the shut down menu option. 5 press the button. Never attempt to switch off the power while the machi...

  • Page 38: 1.4

    10 1.4 power save mode the power save mode automatically lowers the power consumption of the machine by reducing the fuser power. The machine will enter the power save mode when no prints or copies have been made for a preset period of time. • low power mode 1 this mode reduces the temperature of th...

  • Page 39

    11 1.4 power save mode refer to "3.8 system parameter setup (print services on web, 6030/6050)" for changing the power save mode settings from the printer control panel. Downloaded from manualsprinter.Com manuals.

  • Page 40: 1.5

    12 1.5 printer control panel overview both the printer and the copier/printer versions of the 6030/6050/6050a wide format are equipped with a printer control panel. This section provides an overview of this device. Refer to section "2.2 printer control panel usage" and chapter 5 for detailed explana...

  • Page 41: 1.6

    13 1.6 print services on web overview (6030/6050) 1.6 print services on web overview (6030/ 6050) print services on web is web server software which is pre-installed in the 6030/ 6050 wide format printer and copier/printer. Print services on web provides a user-friendly way to perform printer setup,...

  • Page 42

    14 operating modes user mode the user mode interface (user page) is shown in the image below. This page displays immediately after a user logs on to print services on web. The selections on the tabs enable the user to do the following. [job and log] tab check the status of a print job. View and prin...

  • Page 43

    15 1.6 print services on web overview (6030/6050) administrator mode to enter the administrator mode, log on to print services on web, select the [administrator page] button, and then enter the administrator login and password when prompted to do so. The administrator page displays two additional ta...

  • Page 44: 1.7

    16 1.7 logical printers overview (6030/6050) a logical printer (virtual printer) is a group of saved print job settings for a particular data format, i.E., hp-gl, versatec, tiff, cals, and ps/pdf. These saved settings, which are created using print services on web, may include pen attributes, media ...

  • Page 45: 1.8

    17 1.8 loading roll media 1.8 loading roll media the message ‘replace xxx media." will display when there is no media loaded or when the roll in use runs out. The media size displayed on the control panel will turn off when there is no media in the machine. Two rolls of media can be loaded in each o...

  • Page 46

    18 3 while pulling on the lever located in the end of the roll paper shaft, remove the paper core in the direction of the arrow. 4 while pulling the lever located in the end of the roll paper shaft, align the roll paper with the paper size marks on the shaft and set the roll in place. 5 align the ro...

  • Page 47

    19 1.8 loading roll media 6 rotate the roll media until the lead edge is gripped in the roller. 7 gently but firmly close the media tray. The led on the front of the tray will illuminate, and the roll paper will feed automatically to its starting position. 8 set up the media parameters on the copier...

  • Page 48: 1.9

    20 1.9 drawer media size indicators the media size indictors help the user identify the media that is loaded in each of the drawers. These indicators are visible on the right hand side of the drawers. Usage instructions begin on the next page. The following types are available. • standard size a • i...

  • Page 49

    21 1.9 drawer media size indicators inserting media size sheets 1 open the tray. 2 remove the media size sheet. 3 fold the sheet so that the size loaded is displayed. 4 insert the media size sheet. Downloaded from manualsprinter.Com manuals.

  • Page 50

    22 5 gently but firmly close the media tray. Downloaded from manualsprinter.Com manuals.

  • Page 51: 1.10

    23 1.10 loading media for manual feeding 1.10 loading media for manual feeding 1 adjust the (msi) multi sheet inserter/ manual feed unit's side guides to fit the size of the media that is to be printed. 2 place the side of the media to be printed face up, and align it with the (msi) multi sheet inse...

  • Page 52: 1.11

    24 1.11 cutting roll media the lead edge of the media should be cut when the media is loaded, on recovery from a media jam, and when the lead edge of the roll is damaged. There are two methods for cutting the lead edge of the roll media: • automatic cut: this involves making selections on the printe...

  • Page 53

    25 1.11 cutting roll media cutting roll media manually cutting the front roll 1 open the media tray. 2 pull the lever to open the tray cover. 3 rotate the roll media until the lead edge is gripped by the roller. Lever downloaded from manualsprinter.Com manuals.

  • Page 54

    26 4 rotate the knob until the media's lead edge protrudes from the tray outlet. 5 grasp the cutter by the handle and slide it to the opposite side of the tray to cut the paper. Caution: use the cutter handle to prevent personal injury which may result from sliding your fingers along the sharp, meta...

  • Page 55

    27 1.11 cutting roll media 9 close the media tray. Cutting the rear roll 1 open the media tray. 2 rotate the roll paper until the lead edge is gripped by the roller. Downloaded from manualsprinter.Com manuals.

  • Page 56

    28 3 rotate the knob until the media's lead edge protrudes from the tray outlet. 4 pull the lever to open the tray cover. 5 rotate the knob until the paper passes through the tray outlet. 6 grasping the cutter by the handle, slide the cutter to the opposite side of the tray to cut the paper. Caution...

  • Page 57

    29 1.11 cutting roll media 9 return the media to its original location by rotating the knob until the lead edge can be seen in the window. 10 close the media tray. Downloaded from manualsprinter.Com manuals.

  • Page 58

    30 downloaded from manualsprinter.Com manuals.

  • Page 59

    Chapter chapter 0 2 printer overview chapter 2 downloaded from manualsprinter.Com manuals.

  • Page 60: 2.1

    32 chapter 2 printer overview 2.1 overview of the 6030/6050/6050a wide format printer this section provides an overview of the 6030/6050/6050a wide format printer. What is the 6030/6050/6050a wide format printer? The 6030/6050/6050 wide format printer processes print jobs that it receives from a cli...

  • Page 61

    33 2.1 overview of the 6030/6050/6050a wide format printer data formats that can be processed (6050a) processing is possible for the following data formats. • hp-gl formats using hp750c emulation (hp-gl2, hp-rtl) • tiff 6.0 (including lzw) • cals 1&2 • calcomp 906/907/951/pci • filenet • nirs • cgm ...

  • Page 62

    34 chapter 2 printer overview printing methods (6030/6050) documents may be submitted from a client to the 6030/6050 wide format printer using any of the following. • ethernet (direct) printing this capability is for unix systems. Printing takes place over tcp/ip networks using the ftp and lpr comma...

  • Page 63

    35 2.1 overview of the 6030/6050/6050a wide format printer printing methods (6050a) documents may be submitted from a client to the 6050a wide format printer using any of the following. • ethernet (direct) printing printing takes place over tcp/ip networks using lpr protocol or raw sockets. • wide f...

  • Page 64

    36 chapter 2 printer overview print service operations the printer control panel and print services on web are the two main features that enable users to set up and perform print service operations. Printer control panel the printer control panel can be used to perform a variety of tasks, among them...

  • Page 65

    37 2.1 overview of the 6030/6050/6050a wide format printer print services on web (6030/6050 only) print services on web is web server software which is pre-installed in the 6030/ 6050 wide format. Print services on web provides a user-friendly way to perform printer setup, communication (port) setup...

  • Page 66

    38 chapter 2 printer overview main printing functions this section describes the main printing functions which are available with the 6030/6050 wide format printer and copier/printer. Logical printers (6030/6050 only) a logical (virtual) printer is a group of saved print job settings for a particula...

  • Page 67

    39 2.1 overview of the 6030/6050/6050a wide format printer document size input the following two methods are available for judging the size of the input document: • automatic calculates the coordinates of the input document and automatically selects the closest size. • size specificationenables the ...

  • Page 68

    40 chapter 2 printer overview size mapping size mapping is the process of setting up a table that establishes relationships between input document sizes and output image sizes. When size mapping is finished (must be done prior to printing), documents can be enlarged or reduced automatically based on...

  • Page 69

    41 2.1 overview of the 6030/6050/6050a wide format printer plot area, auto-layout, and offset it is possible to print a specified area of an input document. The specified area can be printed in the center of the media or moved to another position (auto- layout, offset). Mirror image, 90-degree rotat...

  • Page 70

    42 chapter 2 printer overview split drawing (image fragmentation) long images (those that exceed 1,189 mm in length) may be split into several parts and printed. Positioning marks can be added to the split prints for positioning purposes. Printing the output time the date and time a document is prin...

  • Page 71

    43 2.1 overview of the 6030/6050/6050a wide format printer canceling jobs jobs transmitted to the 6030/6050/6050a wide format can be deleted by pressing the key on the printer control panel. It is also possible to cancel jobs from print services on web. Meter display the billing meters can be checke...

  • Page 72: 2.2

    44 chapter 2 printer overview 2.2 printer control panel usage this section describes the names and functions of the printer control panel components. Press the > and > keys simultaneously to reset the printer when an error code is displayed. Used for setting up the various functions. Displays variou...

  • Page 73

    45 2.2 printer control panel usage basic printer control panel operations the printer must be in the offline mode before settings can be changed. Pressing the the menu screen. Button functions the following buttons are used to navigate the menu screen. Switches the printer to the offline mode and di...

  • Page 74

    46 chapter 2 printer overview overview of the operation menu the printer control panel’s operation menu is depicted in the image below. Descriptions of the sub-menus follow. System parameter menu sets up the system management information, such as the system date and power save mode settings. Refer t...

  • Page 75

    47 2.2 printer control panel usage port setting menu sets up the communication parameters that are required for connecting to the host. Test plot menu prints test patterns to help verify printer operation. Job logging menu prints job and error logs. Offline plot menu reprints the most recently print...

  • Page 76

    48 chapter 2 printer overview operation examples this section provides examples of how to select menu items. 1 press the the machine will enter the offline mode. 2 press the > key. The top selection in the [network/port set] menu will display. 3 press the > key. The menu items will display in order....

  • Page 77

    49 2.2 printer control panel usage setting up a value this section provides an example of setting up a value. 1 select the menu item that you want to set up so that it displays on the screen. 2 press the > key. The current value will display. 3 use the > and > keys to change the setting. 4 press the...

  • Page 78

    50 chapter 2 printer overview entering numbers and characters this section provides examples of how to enter numbers and characters. 1 select the menu item that you want to set up. 2 press the > key. The current setting for the selected item will display. 3 set up the first number using the > and > ...

  • Page 79: 2.3

    51 2.3 print services on web (6030/6050) 2.3 print services on web (6030/6050) print services on web is web server software which is pre-installed in the 6030/ 6050 wide format. Print services on web enables the user to perform the following procedures from a workstation using a web browser. • set u...

  • Page 80

    52 chapter 2 printer overview starting and exiting print services on web this section explains how to start and exit print services on web. Start print services on web 1 start the browser. 2 enter the url for the 6030/6050 wide format (http://home name or ip address) in the browser's address field, ...

  • Page 81

    53 2.3 print services on web (6030/6050) print services on web organization this section explains the various pages contained within print services on web. User page this is the first page displayed when connecting with the print services on web. The user page allows users to do the following. Admin...

  • Page 82

    54 chapter 2 printer overview the administrator page permits the following. [job and log] tab • check the status of jobs in the print queue. • view and print the job log and the error log. • cancel a print job. • change the priority of a print job. [status tab] • check the status of the printer or c...

  • Page 83

    55 2.3 print services on web (6030/6050) online help click the help [?] button displayed at the top, right corner of the window to display the online help. The online help enables you to answer many questions related to using print services on web. Downloaded from manualsprinter.Com manuals.

  • Page 84: 2.4

    56 chapter 2 printer overview 2.4 freeflow accxes web print management tool (6050a) the freeflow accxes web print managment tool (web printer management tool) is a web-based utility that resides on the controller as a web server. It has the look and feel of a web page even though you are not on the ...

  • Page 85

    57 2.4 freeflow accxes web print management tool (6050a) users • view printer status (including media inventory) and the print queue • view the printer defaults • view the job accounting mode for remote print jobs • generate test prints showing configuration data (such as the controller’s tcp/ ip ad...

  • Page 86

    58 chapter 2 printer overview using web print management tool main menu the main menu contains six selections in hypertext form allowing you to jump to other web pages. Printer queue this selection contains 3 tabs for viewing the job queue, mismatched job queue and the active job queue. Each queue l...

  • Page 87

    Chapter chapter 0 3 printer setup chapter 3 downloaded from manualsprinter.Com manuals.

  • Page 88: 3.1

    60 chapter 3 printer setup 3.1 communication parameters the 6030/6050/6050a wide format printer and copier/printer must be connected to a host pc before printing can be performed. Once the printer or copier/printer is connected to the network, the communication parameters must be set up. The communi...

  • Page 89

    61 3.1 communication parameters tcp/ip the following tcp/ip communication parameters must be set up for the 6030/6050. The communication parameter nomenclature on the printer control panel will sometimes differ from the nomenclature on print services on web (6030/ 6050) or web printer management too...

  • Page 90

    62 chapter 3 printer setup \*the routing table can be edited if [static routing] is set to [enable]. A maximum of 512 items can be saved in the routing table. The [registration not possible] screen will display if the number of items exceeds 512. Menu item description routing table select [add] to e...

  • Page 91

    63 3.1 communication parameters the following tcp/ip communication parameters can be set up for the 6050a using using the printer control panel on the device itself or using the web printer management tool. Menu item description ethernet setting selects the ethernet setting/speed duplex layer. The d...

  • Page 92

    64 chapter 3 printer setup serial (6030/6050 only) the serial communication parameters are listed below. The communication parameter nomenclature on the printer control panel will sometimes differ from the nomenclature on print services on web. The print service on web nomenclature appears in bold t...

  • Page 93

    65 3.1 communication parameters job separation (page limit) sets up the job separation option. The default setting is [no]. [yes] starts data conversion once the command that recognizes the end of the data is received, even if it occurs midway through the file. [no] spools data on the hard disk unti...

  • Page 94

    66 chapter 3 printer setup centronics (optional, 6030/6050 only) the centronics communication parameters are presented below. Menu item description ack mode the ack mode is selected from [mode0], [mode1], [mode2], [mode3], and [mode7]. The default setting is [mode0]. Dma timeout the timeout value fo...

  • Page 95

    67 3.1 communication parameters vpi (optional, 6030/6050 only) the following vpi communication parameters must be set up. Menu item description report offline determines if the host will be notified offline of the media running out. The default setting is [no]. [yes] issues offline notification. [no...

  • Page 96

    68 chapter 3 printer setup snmp (6030/6050 only) the communication parameters listed below must be set up. Snmp must be set up in print services on web. The communication parameter nomenclature on the printer control panel will sometimes differ from the nomenclature on print services on web. The pri...

  • Page 97: 3.2

    69 3.2 communication parameter setup (printer control panel, 6030/6050) 3.2 communication parameter setup (printer control panel, 6030/6050) this section explains the procedures for setting up the communication parameters from the printer control panel. Procedure 1 press the > key with [port setting...

  • Page 98

    70 chapter 3 printer setup 1 display [tcp/ip] on the selection screen, and then press the > key. 2 select the item that is to be set up with the use of the > and > keys, and then press the > key. [ethernet setting], [default parser], [ip address], [mask value], [e-net address], [dynamic routing], an...

  • Page 99

    71 3.2 communication parameter setup (printer control panel, 6030/6050) 1. Select [on] for [static routing], and then press the key. Now press the > key. 2. Select [add] for the [routing table], and then press the > key. 3. Enter the destination address, and then press the key. After setting up the ...

  • Page 100

    72 chapter 3 printer setup 3 select the parameters with the use of the > and > keys, and then press the key. An asterisk [*] will display on the right side of the parameters once they have been set. Centronics (optional) setup 1 display [centro] on the setup item selection screen, and then press the...

  • Page 101

    73 3.2 communication parameter setup (printer control panel, 6030/6050) 3 select the parameters with the use of the > and > keys, and then press the key. An asterisk [*] will display on the right side of the parameters once they have been set. Job separation yes * downloaded from manualsprinter.Com ...

  • Page 102: 3.3

    74 chapter 3 printer setup 3.3 communication parameter setup (printer control panel, 6050a) this section explains the procedures for setting up the communication parameters from the printer control panel. Procedure 1 press the > button two times to navigate to the [system settings] menu. Then press ...

  • Page 103: 3.4

    75 3.4 communication parameter setup (print services on web, 6030/6050) 3.4 communication parameter setup (print services on web, 6030/6050) the communication parameters for tcp/ip, serial, centronics (optional), vpi (optional), and snmp can be set up from print services on web. These procedures are...

  • Page 104

    76 chapter 3 printer setup 2 select the interface or protocol ([tcp/ip], [serial], [centro], [vpi], [snmp]) to be set up from the [system parameters] menu. The setup selections will display in the right-hand pane of the window. In the example below, [serial] has been selected. 3 set up each of the p...

  • Page 105

    77 3.4 communication parameter setup (print services on web, 6030/6050) 4 to print a list of the settings, drag the right scroll bar to the bottom, and then select the [print] button. 5 after setting up all of the parameters, switch the main power switch off and then on to enable the changes to take...

  • Page 106: 3.5

    78 chapter 3 printer setup 3.5 communication parameter setup (web printer management tool, 6050a) • consult web printer management tool help system for details on communication parameter setup of the 6050a. Downloaded from manualsprinter.Com manuals.

  • Page 107: 3.6

    79 3.6 system parameter setup (printer control panel, 6030/6050) 3.6 system parameter setup (printer control panel, 6030/6050) the following system parameters can be set up from the printer control panel. These parameters can be set up on the copier control panel on the xerox 6030/6050 copier/printe...

  • Page 108

    80 chapter 3 printer setup 6030/6050 printer control panel example procedure 1 press the > key with [menu]/[system parameter] displayed. 2 scroll to the item you wish to set up using the > and > keys. [set date], [auto roll], [spa paper width], [smoothing], [low power mode1], [low power mode2], slee...

  • Page 109

    81 3.6 system parameter setup (printer control panel, 6030/6050) [sleep mode], [attention light], [print density], [job recovery], and [net cont. Time] will display, in that order.. Press the > key to select the item. 3 select the parameters using the > and > keys, and then press the key. An asteris...

  • Page 110: 3.7

    82 chapter 3 printer setup 3.7 system settings setup (printer control panel, 6050a) the following system parameters can be set up from the printer control panel. • refer to "2.2 printer control panel usage" for detailed instructions on printer control panel operations. Menu item description tcp/ip a...

  • Page 111

    83 3.7 system settings setup (printer control panel, 6050a) 6050a printer control panel example procedure 1 press the > key with [menu]/[system settings] displayed. 2 scroll to the item you wish to set up using the > and > keys. [tcp/ip], [date/ time], and timers will display, in that order. Press t...

  • Page 112: 3.8

    84 chapter 3 printer setup 3.8 system parameter setup (print services on web, 6030/6050) the system parameters listed below can be set up from print services on web. These procedures are performed on the administrator page. Refer to "3.4 communication parameter setup (print services on web, 6030/605...

  • Page 113

    85 3.8 system parameter setup (print services on web, 6030/6050) procedure 1 start print services on web, log in as administrator, and display the [properties] tab. Job recovery determines how the jobs that were in the print queue when the printer power was shut off will be processed when the printe...

  • Page 114

    86 chapter 3 printer setup 2 select the item that is to be set up from the [system parameter menu], for example, [priority], [replot], [print density], [paper width for special a], [job recovery], [exclusive access time out], [extension], and [set date]. Setting up [priority] 1 select [priority] fro...

  • Page 115

    87 3.8 system parameter setup (print services on web, 6030/6050) 3 press the [apply] button to save the new setting, [cancel] to revert to the existing setting, or [reset to default] to return to the factory default setting. Setting up [replot] 1 select [replot] from the [system parameters] menu. Th...

  • Page 116

    88 chapter 3 printer setup 2 enter a positive or a negative number between -99 and +99 to set up the default print density. Larger negative numbers lighten the prints. Higher positive numbers darken the prints. The factory default setting is [0]. 3 press the [apply] button to save the new setting, [...

  • Page 117

    89 3.8 system parameter setup (print services on web, 6030/6050) 2 select the required paper width for special a1 and special a2 paper from the available selections. 3 press the [apply] button to save the new setting, [cancel] to revert to the existing setting, or [reset to default] to return to the...

  • Page 118

    90 chapter 3 printer setup 2 select the required format from [data format]. 3 as required, add or delete an extension: add an extension to add a new extension, enter an extension name of eight characters or less in the text field, and then click the [add] button. Delete an extension to delete an ext...

  • Page 119

    91 3.8 system parameter setup (print services on web, 6030/6050) 2 enter the date. 3 enter the time. 4 press the [apply] button to save the new setting, or press [cancel] to revert to the existing setting. If the time selections are not displayed, drag the bottom scroll bar to the right to display t...

  • Page 120: 3.9

    92 chapter 3 printer setup 3.9 system parameter setup (web printer management tool, 6050a) • consult web printer management tool help system for details on setting up system parameters for the 6050a. Downloaded from manualsprinter.Com manuals.

  • Page 121: 3.10

    93 3.10 printing a configuration list (6030/6050) 3.10 printing a configuration list (6030/ 6050) the procedures below explain how to print a configuration list that shows the hardware and software configuration, communication parameter (port) settings, and system parameter settings of the printer. ...

  • Page 122

    94 chapter 3 printer setup 2 select [print settings] in the system parameters menu. The current print settings will display in the right pane. 3 using the scrollbar on the right side of the window, scroll to the bottom of the print settings list, and then select the [print] button. The printer will ...

  • Page 123

    95 3.10 printing a configuration list (6030/6050) an example of the configuration list (settings printout) is shown below. Downloaded from manualsprinter.Com manuals.

  • Page 124

    96 chapter 3 printer setup description of the configuration list contents the contents of configuration list are explained below. Displayed item description h/w config model product name software version installed version of the printer software ram total displays the amount of memory installed in t...

  • Page 125: 3.11

    97 3.11 printing a configuration list (6050a) 3.11 printing a configuration list (6050a) the procedures below explain how to print a configuration list that shows the hardware and software configuration, communication parameter (port) settings, and system parameter settings of the printer. This list...

  • Page 126

    98 chapter 3 printer setup 2 select the [test print] sub-tab that appears. 3 depending upon your information requirements, click on the [minimal], [normal], [full], or if postscript is available, [postscript] test print buttons. Explanations of each of these options are available from the web printe...

  • Page 127

    99 3.11 printing a configuration list (6050a) an example of the configuration list (settings printout) is shown below. Downloaded from manualsprinter.Com manuals.

  • Page 128

    100 chapter 3 printer setup description of the configuration list contents the contents of the configuration list are explained below. Category description controller configuration displays data such as controller date/time, firmware version, size of hard disk, etc. Optional controller features disp...

  • Page 129: 3.12

    101 3.12 software option (print services on web, 6030/6050) 3.12 software option (print services on web, 6030/6050) the [software option] selection on the print services on web [properties] tab displays all installed optional software and related feature key (key install key) information, for exampl...

  • Page 130: 3.13

    102 chapter 3 printer setup 3.13 software option (web printer management tool, 6050a) similar to the [software option] selection under the print services on web [properties] tab, the the [features] selection under the [configuration] tab in web print management tool allows for the display of what fe...

  • Page 131: 3.14

    103 3.14 change password (print services on web, 6030/6050) 3.14 change password (print services on web, 6030/6050) the [change password] selection on the print services on web [properties] tab can be used to change the password that is used to log in to the administrator page. 1 select the [change ...

  • Page 132: 3.15

    104 chapter 3 printer setup 3.15 change password (web printer management tool, 6050a) 1 select the [utilities] tab on the main navigation bar, then click on the [password] sub-tab. 2 enter the current printer password in the [enter the current printer password:] field. 3 enter the new password in th...

  • Page 133: 3.16

    105 3.16 change default language (print services on web, 6030/6050) 3.16 change default language (print services on web, 6030/6050) the [change default language] selection on the print services on web [properties] tab can be used to change the language that is displayed when print services on web is...

  • Page 134: 3.17

    106 chapter 3 printer setup 3.17 change default language (web printer management tool, 6050a) web printer management tool allows the user to change the language displayed when it is started. The language can be changed to english, italian, french, spanish, south american portuguese, german or russia...

  • Page 135

    Chapter chapter 0 4 logical printer setup and operation (6030/6050 only) chapter 4 downloaded from manualsprinter.Com manuals.

  • Page 136: 4.1

    108 chapter 4 logical printer setup and operation (6030/6050 only) 4.1 creating a new logical printer one hundred logical (virtual) printers, numbered from 00 to 99, can be set up for each of the available data formats (hp-gl, versatec, tiff, cals, ps/pdf). The procedure below explains how to create...

  • Page 137

    109 4.1 creating a new logical printer 3 select the data format for the new logical printer from the [data format] menu. The selections include [versatec], [hp-gl], [tiff], [cals], and optionally, [ps/pdf]. The logical printers are pre-configured in the factory to their default print settings. These...

  • Page 138

    110 chapter 4 logical printer setup and operation (6030/6050 only) 4 select an unused logical printer. To do this, select a range of numbers in the [detail] list at the left side of the screen, beginning with [00-09]. The ten logical printers will appear in the right pane of the screen. 5 continue s...

  • Page 139: 4.2

    111 4.2 defining the print settings 4.2 defining the print settings the next step, after creating a logical printer, is to set up the parameters that define how it will process print jobs. These parameters are located at the left side of the screen in the [print setup] menus ([media setting], [input...

  • Page 140: 4.3

    112 chapter 4 logical printer setup and operation (6030/6050 only) 4.3 logical printer print settings this section describes the print settings for the logical printers. Logical printer parameters by data format the logical printer parameters will vary by data format, as indicated in the table below...

  • Page 141

    113 4.3 logical printer print settings media setting (continued) media source determines whether the paper is to be fed automatically from a roll or from the (msi) multi sheet inserter/manual feed unit, and sets up the priority ([job] or [controller]). The optional (msi) multi sheet inserter/manual ...

  • Page 142

    114 chapter 4 logical printer setup and operation (6030/6050 only) parameters unique to data formats [print setup] menu menu item description data format output setting plot area sets the print range, centering, and offset. All (see note) color option enables or disables the white mode (white line) ...

  • Page 143

    115 4.3 logical printer print settings media series this parameter sets up the media size series for the input size, output size, and media size. Each item can be set to a different media size series. Settings the settings are as follows. All of the default settings are [iso a]. Menu item descriptio...

  • Page 144

    116 chapter 4 logical printer setup and operation (6030/6050 only) the media types that can be set for each paper group are shown below. • input size, output size • media size media series standard size iso a a0 to a4, u0 to u4, a0l to a4l iso b input size: b0 to b4, bu0 to bu4, b0l to b4l output si...

  • Page 145

    117 4.3 logical printer print settings size/media mapping standard size images and user-defined images can be enlarged and reduced to fit standard and user-defined output sizes. This is known as "size mapping". It is also possible to specify which roll media is to be used based on the output size. T...

  • Page 146

    118 chapter 4 logical printer setup and operation (6030/6050 only) settings the settings for this function are as follows. Menu item description auto mapping sets whether the automatic mapping functions is to be enabled or not. The output paper size that best matches the output image size will be de...

  • Page 147

    119 4.3 logical printer print settings example when the mapping table is set up as shown below, an image with an input size of a3 will be printed as follows. C size mapping is applied to the image with an input size of a3, which is then enlarged to an a2 output size (enlarged by 141.4%). D media map...

  • Page 148

    120 chapter 4 logical printer setup and operation (6030/6050 only) media source this setting determines whether the media will automatically feed from a roll or from the manual feed tray (cut sheet). The priority sequence when automatic selection is specified is [roll1], [roll2], [roll3], and [roll4...

  • Page 149

    121 4.3 logical printer print settings media type determines the default media type selection for printing. This setting is valid when a different type of media of the same size is loaded in the printer. [any] is set for this under normal circumstances. Settings the settings for this function are as...

  • Page 150

    122 chapter 4 logical printer setup and operation (6030/6050 only) user-defined size the user-defined sizes are used for printing long images and non-standard size media. User-defined sizes can be specified for each standard size. It is possible to uniformly output all images that exceed the standar...

  • Page 151

    123 4.3 logical printer print settings input option sets up the input image size. Two judgment methods are available for input image size. • automatic (auto) calculates the coordinates of the input image and automatically determines the nearest media size. • specify size enables the user to manually...

  • Page 152

    124 chapter 4 logical printer setup and operation (6030/6050 only) number of fragments sets up the number of copies to be printed consecutively in a range from 0 to 99 when [size] has been set to [auto]. The default setting is [1]. A value that subtracts 1 from the length of the standard size will b...

  • Page 153

    125 4.3 logical printer print settings input size margin specifies the top, bottom, left, and right margin settings for determining input sizes. Plus (+) values represent margins outside of the media size, and minus (–) values represent margins inside the media size. The size that includes (excludes...

  • Page 154

    126 chapter 4 logical printer setup and operation (6030/6050 only) the settings for this function are as follows. Example the media margin settings are determined according to the following for input data consisting of 300 x 420 mm. Menu item description x sets the left and right margin values withi...

  • Page 155

    127 4.3 logical printer print settings plot area enables the print range (the plot area) to be specified based on the input image information. The plot area can be set up so that the image prints in the center of the media (auto layout) or is offset (set offset value). If part of the image overlaps ...

  • Page 156

    128 chapter 4 logical printer setup and operation (6030/6050 only) settings the settings for this function are as follows. When [disable] is selected for [auto layout], specify the desired offset value for the media size to be used. For example, if the following settings have been made, an image wit...

  • Page 157

    129 4.3 logical printer print settings in the y direction. Descriptions of area mode the area modes are described below. Adapted the data range of the input image is set as the print range (see fig.1). Fixed (hp-gl) the range that encloses the maximum coordinate of the input image and the coordinate...

  • Page 158

    Fig.1. (adapted) fig.2. (fixed) fig.3. (ip area and iw area) (0,0) input image output image offset auto layout: [no] auto layout: [yes] input image (+x1,+y1) (0,0) offset output image auto layout: [no] auto layout: [yes] input image (0,0) offset output image the area specified with the [ip command] ...

  • Page 159

    131 4.3 logical printer print settings fig.4. (first) fig.5. (first ) (0,0) output image offset auto layout: [no] auto layout: [yes] (0,0) input image output image downloaded from manualsprinter.Com manuals.

  • Page 160

    132 chapter 4 logical printer setup and operation (6030/6050 only) priority sets up the printing priority. This function increases the priority of a job to print it out sooner when the job queue is congested. Settings the settings for this function are as follows. Menu item description priority sets...

  • Page 161

    133 4.3 logical printer print settings title block the setting determines whether or not to rotate images 180 degrees. This setting is used to change the image orientation to ensure correct folding. Settings the available settings are as follows. Menu item description media size determines whether o...

  • Page 162

    134 chapter 4 logical printer setup and operation (6030/6050 only) split drawing when an image exceeds 1,189mm in length, it can be split (fragmented) and printed in sections. This function also enables you to add positioning marks on each split section. A maximum of 30 such sections is possible. Se...

  • Page 163

    135 4.3 logical printer print settings page margin determines whether or not the page margin will be present, and sets the margin where the pages are joined within a range of 0 to 90 mm. The default settings is [0 mm]. Alignment mark printing determines whether or not to print positioning marks. The...

  • Page 164

    136 chapter 4 logical printer setup and operation (6030/6050 only) message option determines whether or not to print error messages, label messages, and date messages on the print. The size of the characters used in the messages is fixed at a height of 2 mm regardless of the enlargement or reduction...

  • Page 165

    137 4.3 logical printer print settings date message determines whether or not to print date messages. The default setting is [off]. The date format is [year/month/day hour:minutes]. Example: [2006/01/02 14:56] display position sets up the location where the message(s) will be printed. [upper left] p...

  • Page 166

    138 chapter 4 logical printer setup and operation (6030/6050 only) printed copy sets up the default number of copies to be printed. Settings the settings for this function are as follows. The [priority] parameter can only be set for versatec data. Menu item description printed copy sets up the numbe...

  • Page 167

    139 4.3 logical printer print settings output option sets up the output size. The following two judgment methods are available for output image size. • automatic (auto, other, mix, mix2) determines the most suitable output size based on the input size and the size mapping table. It also determines t...

  • Page 168

    140 chapter 4 logical printer setup and operation (6030/6050 only) settings the settings for this function are as follows. Menu item description media size this parameter can be selected from [auto], [other], [mix], [mix2], or any of the standard media sizes. The default setting is [auto]. [auto] th...

  • Page 169

    141 4.3 logical printer print settings input image that is longer than the standard size output image in the case of [auto] output in a size that is the standard shape increased in a multiple of integers. In the case of [other] the same size as the input image is output. 4a3 connect = 3 a3 a3 a3 a3 ...

  • Page 170

    142 chapter 4 logical printer setup and operation (6030/6050 only) size recognition size recognition determines whether images that are less that an a0 size in length (1,189 mm), but that are larger than a standard size, will be printed on media that is one size larger, or on standard size that has ...

  • Page 171

    143 4.3 logical printer print settings the settings for this function are as follows. Menu item description size recognition sets up the size recognition priority mode. The default value is [standard long size output]. [standard long size output] outputs images that are within the a0 size, but excee...

  • Page 172

    144 chapter 4 logical printer setup and operation (6030/6050 only) color option sets the pen drawing color at a specified density or at black when a color command other than black is specified. Settings the settings for this function are as follows. This setting is only valid for hp-gl and versatec ...

  • Page 173

    145 4.3 logical printer print settings transform enables or disables the auto scale (automatic enlargement/reduction), mirror image, and 90-degree rotation functions. Auto scale mirror image input image output image input image output image downloaded from manualsprinter.Com manuals.

  • Page 174

    146 chapter 4 logical printer setup and operation (6030/6050 only) 90-degree rotation settings the settings for this function are as follows. Menu item description auto scale determines whether or not to automatically enlarge or reduce sizes when the input size and output size are different. The def...

  • Page 175

    147 4.3 logical printer print settings define single pen defines the width, color, end style, and joint style pen attributes for hp-gl data. Click the [change] button to edit the attributes of a pen. The screen below will display. Click [apply] to save your changes. Settings the settings for this fu...

  • Page 176

    148 chapter 4 logical printer setup and operation (6030/6050 only) end style width sets the line width in a range from 0 to 511, where a setting of 1 = 0.0635 mm. The actual width of the line will be n × 0.0635, with the line width set to n. The default setting is [2]. Lines may be printed in patche...

  • Page 177

    149 4.3 logical printer print settings square the normal method for ending lines. Round rounds off both ends of the line with a half radius of the line width. Extend extends both ends by half the line width. Triangle adds a triangle that is half of the line width in length to both ends of the line. ...

  • Page 178

    150 chapter 4 logical printer setup and operation (6030/6050 only) unjoint does not join the lines. Bevel joins the outside corner of one line to the outside corner of the other line. Miter extends the outside corners of both lines until they meet in a miter. Round rounds off the area where the two ...

  • Page 179

    151 4.3 logical printer print settings define multi pen sets up the line width, color, end style, and joint style pen attributes for hp-gl data for multiple pens. The same parameters will be set for all other pen numbers within the specified range. Settings the settings for this function are as foll...

  • Page 180

    152 chapter 4 logical printer setup and operation (6030/6050 only) pen option determines whether or not to change the ratio of the pen thickness based on the enlargement/reduction ratio. Settings the setting for this function is as follows. This setting is valid for hp-gl data and versatec data only...

  • Page 181

    153 4.3 logical printer print settings emulation selects the processing language for the hp-gl format only. Settings the settings for this function are as follows. Menu item description emulation sets the processing language at either [hp-gl] or [hp-gl/ 2]. The default setting is [hp-gl]. Downloaded...

  • Page 182

    154 chapter 4 logical printer setup and operation (6030/6050 only) ps command enables or disables the ps command. Settings the available settings are as follows. These settings are valid with hp-gl data only. Menu item description ps command [do not ignore] enables the ps command. [ignore] disables ...

  • Page 183

    155 4.3 logical printer print settings eop command enables and disables the eop command for hp-gl data only. Settings the settings for this function are as follows. The default value for all parameters is [enable]. Menu item description sp:pen0 enables or disables the sp:pen0 command. Pg:adv page en...

  • Page 184

    156 chapter 4 logical printer setup and operation (6030/6050 only) vcgl pen style (vcgl define pen) sets up the pen specifications for vcgl data only. Settings the settings for this function are as follows. Dashstyle menu item description joint style sets up the joint processing for lines to [unjoin...

  • Page 185

    157 4.3 logical printer print settings no wrap each dot represents the start of the broken line. Lines printed with the use of the broken line style shown in the example will be printed as a non-broken line, as shown in the illustration on the left. This is due to the fact that the dot appears befor...

  • Page 186

    158 chapter 4 logical printer setup and operation (6030/6050 only) vcgl pen width sets up the width of the vcgl pen only. Settings the setting for this function is as follows. Menu item description width sets the line width in a range from 0 to 511. 1 = 0.0635 mm. The actual width of the line will b...

  • Page 187

    159 4.3 logical printer print settings vrf define pen (define single pen) sets the pen attributes for vrf data only. Click the [change] button to define the attributes for a pen. The vrf define pen menus will display on the right side of the screen. Settings the settings for this function are as fol...

  • Page 188

    160 chapter 4 logical printer setup and operation (6030/6050 only) end style sets the end of the line to [square], [round], [extend], or [triangle]. The default setting is [square]. Refer to "end style" for further details. Color sets the line color to [black] or [white]. The default setting is [bla...

  • Page 189

    161 4.3 logical printer print settings vrf define multi pen sets the pen attributes for multiple pens for vrf data only. The same parameters will be set for all other pen numbers within the specification range. Settings the settings for this function are as follows. Menu item description pen no. Spe...

  • Page 190

    162 chapter 4 logical printer setup and operation (6030/6050 only) tiff option sets up the sorting and output sequence, and the resolution priority for tiff data. Settings the settings for this function are as follows. These settings are only valid with tiff data. Menu item description sort mode det...

  • Page 191

    163 4.3 logical printer print settings cals option determines whether to enable or disable the [rotate] command for cals data only. Settings the settings for this function are as follows. Menu item description specify output direction [enable] enables the [rotate] command. [disable] disables the [ro...

  • Page 192

    164 chapter 4 logical printer setup and operation (6030/6050 only) ps/pdf option the available selections set up the default media size, roll, and dms for ps/pdf data. Settings the settings for this function are as follows. Menu item description default media size if media size information is not in...

  • Page 193: 4.4

    165 4.4 logical printer operations 4.4 logical printer operations this section explains the procedures for performing the following using print services on web. • selecting the media type • using media other than the default series • changing output roll media for an entire job • reduction and enlar...

  • Page 194

    166 chapter 4 logical printer setup and operation (6030/6050 only) selecting the media type the media type for the logical printers is set up using the [media type] selection. The available selections include [any], [bond], [vellum], and [film]. [any] typically is selected as the media type. Specify...

  • Page 195

    167 4.4 logical printer operations using media other than the default series the media size series is set up using the [media series] selection. The available selections include [iso a series], [iso b series], [sp. A series], [arch series], [ansi series], and [arch-30 series]. The [input size], [out...

  • Page 196

    168 chapter 4 logical printer setup and operation (6030/6050 only) changing output roll media for an entire job by setting the [output option] [size] selection to [auto], the output media is determined by the settings in the logical printer's [media mapping] table. If a media mapping table is prepar...

  • Page 197

    169 4.4 logical printer operations reduction and enlargement using size mapping reduction and enlargement can be performed using the size mapping table. The size mapping table establishes relationships between input image sizes and output image sizes. It enables users to enlarge or reduce prints aut...

  • Page 198

    170 chapter 4 logical printer setup and operation (6030/6050 only) printing long documents the media cut mode can be set to either the standard a0 format (1,189 mm), the standard shape increased in length, or the synchronized cut. This parameter is set up using the logical printer [output option] fe...

  • Page 199: 4.5

    171 4.5 print services on web: job and log 4.5 print services on web: job and log the print services on web [job and log] tab enables the user to perform the following. • display the print queue • cancel and change the priority of jobs • manage the job and error logs display the print queue perform ...

  • Page 200

    172 chapter 4 logical printer setup and operation (6030/6050 only) 2 select [job not completed]. A list of print jobs will display on the right side of the window. If the administrator page is displayed, the jobs that are waiting to print will display a [ change ] link at the right side. A job that ...

  • Page 201

    173 4.5 print services on web: job and log printer name displays the name of the destination logical printer. [---] is displayed when the name is unknown. Size displays the size of the job in kb. Change job changes the priority of or cancels a job. (on the administrator page only) displayed item des...

  • Page 202

    174 chapter 4 logical printer setup and operation (6030/6050 only) cancel and change the priority of jobs use this procedure to cancel a print job or change its priority. Procedure 1 start print services on web, log on as administrator, and select the [job and log] tab. 2 select [job not completed]....

  • Page 203

    175 4.5 print services on web: job and log 3 click the [change] link located on the right side of the job that you want to cancel or change. The [change job] page will display. 4 to cancel the job, click the [execute] button. 5 to change the priority of the job, select either [high], [normal], or [l...

  • Page 204

    176 chapter 4 logical printer setup and operation (6030/6050 only) manage the job and error logs this function allows the user to print and delete the job log and the error log. Job log the job log is a record of all completed print jobs. A variety of information is recorded here, including job numb...

  • Page 205

    177 4.5 print services on web: job and log 2 select [job log] from the [log list] menu. A list of processed jobs will display on the right side of the screen. To display a subset of the logged print jobs: • enter a range in the [job number] fields, and then click the [update] button - or - • enter t...

  • Page 206

    178 chapter 4 logical printer setup and operation (6030/6050 only) downloaded from manualsprinter.Com manuals.

  • Page 207

    179 4.5 print services on web: job and log 2 select [job log] from the [log list] menu. A list of completed jobs will display on the right side of the screen. To display a subset of the logged print jobs, enter a range in [job number] or specify the period in the [print log from:] fields, and then c...

  • Page 208

    180 chapter 4 logical printer setup and operation (6030/6050 only) 2 select [job log] from the [log list] menu. A list of log information will display in the right pane. Downloaded from manualsprinter.Com manuals.

  • Page 209

    181 4.5 print services on web: job and log 3 click [change settings]. The [job log setup] screen will display. 4 select [on] as the [auto print setup] selection, and then click [apply]. The job log will print automatically whenever sufficient job log entries accumulate. Delete the job log 1 start pr...

  • Page 210

    182 chapter 4 logical printer setup and operation (6030/6050 only) downloaded from manualsprinter.Com manuals.

  • Page 211

    183 4.5 print services on web: job and log 3 click the [delete log] button. A confirmation popup will display. 4 select the [ok] button to delete the job log, or [cancel] to retain the log. Save the job log 1 start print services on web, log on as administrator, and display the [job and log] tab. 2 ...

  • Page 212

    184 chapter 4 logical printer setup and operation (6030/6050 only) downloaded from manualsprinter.Com manuals.

  • Page 213

    185 4.5 print services on web: job and log 3 further define the job log, if necessary, using the [print log from], [job number], [date], and [display] selections, and then click the [save into file] link. The job log will be saved in a comma-separated value (csv) format, and displayed as in the figu...

  • Page 214

    186 chapter 4 logical printer setup and operation (6030/6050 only) 2 select [error log] from the [log list] menu. The error log will display on the right side of the screen. Saving, deleting, printing the error log the procedures for saving, deleting, and printing the error log(s) are the same as th...

  • Page 215: 4.6

    187 4.6 print services on web: status 4.6 print services on web: status the following operations can be performed using print services on web. • display printer status • start and stop job reception, printing, and the print service display printer status this function displays the status of the 6030...

  • Page 216

    188 chapter 4 logical printer setup and operation (6030/6050 only) 2 click the [update] button at the upper right corner of the tab to update the display. The current status of the machine will display. Use the right scroll bar to see the remaining details. Items displayed on the status tab the foll...

  • Page 217

    189 4.6 print services on web: status the following messages are displayed for the iot status. Displayed item description idle the printer is in standby mode, ready to receive a print job. Printing the printer is printing. Warm-up the printer is warming up. Power off the printer is powered off. Lowe...

  • Page 218

    190 chapter 4 logical printer setup and operation (6030/6050 only) start and stop job reception, printing, and the print service this function enables the following procedures to be performed. • stop job reception stops job reception from clients. • start job reception starts job reception. • stop p...

  • Page 219: 4.7

    191 4.7 print services on web: tools 4.7 print services on web: tools the print services on web [tools] tab enables you to do the following: • " print a test pattern" • " print a diagnostic report" print a test pattern procedure 1 start print services on web, log on as administrator, and select the ...

  • Page 220

    192 chapter 4 logical printer setup and operation (6030/6050 only) print a diagnostic report procedure 1 start print services on web, log on as administrator, and select the [tools] tab. 2 select [diag report]. 3 "diag report" will appear on the right side of the screen. 4 specify the inclusive repo...

  • Page 221: 4.8

    193 4.8 manual feed printing 4.8 manual feed printing manual feed printing is performed on cut sheet media that has been loaded in the msi (multi sheet inserter/manual feed unit). The job information from the client must specify manual feeding. Manual feed printing is also possible using the followi...

  • Page 222

    194 chapter 4 logical printer setup and operation (6030/6050 only) downloaded from manualsprinter.Com manuals.

  • Page 223

    Chapter chapter 0 5 additional operations from the printer menu chapter 5 downloaded from manualsprinter.Com manuals.

  • Page 224: 5.1

    196 chapter 5 additional operations from the printer menu 5.1 introduction the printer control panel’s menus enable the user to perform the following major tasks: (on the 6030/6050 wide format) • set up the system parameters using the [system parameters] submenu. • set up the communication parameter...

  • Page 225: 5.2

    197 5.2 printer control panel menu (6030/6050) 5.2 printer control panel menu (6030/6050) the following is a list of the menus and submenus which can be accessed by pressing the printer enters the offline mode, the first of two top level menus displays, that is, the [network port/set] menu. From thi...

  • Page 226

    198 chapter 5 additional operations from the printer menu [network port/set] menu level 1 level 2 level 3 level 4 level 5 level 6 system parameter set date set date * yy/mm/dd hh: mm auto roll roll Ætray roll Ætray * off * on tray Æroll tray Æroll * off * on spa paper width spa paper width * sp a1 *...

  • Page 227

    199 5.2 printer control panel menu (6030/6050) port setting tcp/ip ethernet setting ethernet setting * auto * 10base_t * 100base_t default parser default parser * hpgl * tiff * cals * versatec *ps/pdf ip address ip address * xxx.Xxx.Xxx.Xxx mask value mask value * xxx.Xxx.Xxx.Xxx e-net address e-net...

  • Page 228

    200 chapter 5 additional operations from the printer menu port setting serial handshake handshake * xon/xoff * hardware * enq-ack * software (enq-ack and software only with hpgl) default parser hpgl baud rate baud rate * 300 * 1200 * 2400 * 4800 * 9600 * 19200 parity parity * none * even * odd data ...

  • Page 229

    201 5.2 printer control panel menu (6030/6050) port setting vpi (optional) report offline report offline * no * yes eop timeout eop timeout * no_timeout * timeout Ö timeout value * 1 to 255 sec job separation job separation * no * yes print config set: to print. Test plot test plot plot size plot si...

  • Page 230

    202 chapter 5 additional operations from the printer menu [print setup] menu the print setup menu should be used immediately after loading new media or changing the type and/or size of media in the media drawers or the bypass (msi). Level 1 level 2 level 3 level 4 level 5 level 6 print setup media *...

  • Page 231: 5.3

    203 5.3 printer control panel menu (6050a) 5.3 printer control panel menu (6050a) the following is a list of the menus and submenus which can be accessed by pressing the as a reminder, the following buttons are used to navigate the printer control panel menus. [localization] menu > key displays the ...

  • Page 232

    204 chapter 5 additional operations from the printer menu [system settings] menu system settings tcp/ip ip address *xxx.Xxx.Xxx.Xxx *xxx.Xxx.Xxx.Xxx *xxx.Xxx.Xxx.Xxx *enable *disable *enable *disable ip subnet mask ip gateway dhcp rarp/bootp date/time *mm/dd/yyyy hh:mm timers power management/ low p...

  • Page 233

    205 5.3 printer control panel menu (6050a) [utilities] menu test print *printer configuration *printer settings *pen palettes *all utilities billing meters meter 1 #### meter 2 #### shut down *shut down *restart downloaded from manualsprinter.Com manuals.

  • Page 234

    206 chapter 5 additional operations from the printer menu [print setup] menu the print setup menu should be used immediately after loading new media or changing the type and/or size of media in the media drawers or the bypass (msi). Tray roll *1,2 roll *3,4 print setup *enable *disable bypass *enabl...

  • Page 235: 5.4

    207 5.4 test printing (6030/6050 only) 5.4 test printing (6030/6050 only) this function prints out a test pattern to verify correct printer operation. The media size can be selected from a0 through a4. Procedure 1 press the > key with [test plot] displayed on the parameter selection screen. 2 press ...

  • Page 236: 5.5

    208 5.5 managing the job and error logs (6030/6050 only) 5.5 managing the job and error logs (6030/6050 only) log data for print jobs is saved in the following two logs. • job log • error log the user can perform the following log management tasks from the printer control panel. • set up the system ...

  • Page 237

    209 5.5 managing the job and error logs (6030/6050 only) > key. 2. Select either [on] or [off] with the use of the > and > keys when [auto mode] has been specified, and then press the key. 1. Select the starting date and ending date (yy, mm, dd) of the relevant jobs with the use of the > and > keys,...

  • Page 238

    210 chapter 5 additional operations from the printer menu error log (6030/6050 only) this section explains the procedures for printing and clearing the error log. Procedure 1 press the > key with [job logging] displayed. 2 display the [error log] with the use of the > key, and then press the > key. ...

  • Page 239

    211 5.5 managing the job and error logs (6030/6050 only) press the key when [set: to clear.] is displayed. The error log will be deleted. Sample error log list clear set : to clear. When [clear] is selected [errorlog : page 1] [xerox 6050wf version 2.X.Xx] jobno data&time task name errno errorlevel ...

  • Page 240: 5.6

    212 chapter 5 additional operations from the printer menu 5.6 reprinting (6030/6050 only) this function reprints the file that was most recently printed. The copy quantity (1 to 99) also can be specified. Procedure 1 press the > key with [offline plot] displayed on the parameter selection screen. 2 ...

  • Page 241: 5.7

    213 5.7 billing meter confirmation (6030/6050) 5.7 billing meter confirmation (6030/6050) this feature displays the billing meters on the printer control panel. Quantities of up to nine digits can be displayed. Procedure 1 press the > key with [billing info] displayed. 2 press the > key. 3 select th...

  • Page 242: 5.8

    214 chapter 5 additional operations from the printer menu 5.8 billing meter confirmation (6050a) this feature displays the billing meters on the printer control panel. Quantities of up to nine digits can be displayed. Procedure 1 press the > key with [utilities] displayed. 2 press the > once, then p...

  • Page 243: 5.9

    215 5.9 print setup menu 5.9 print setup menu this section explains the items which can be set up from the [print setup] menu on the printer control panel. Setting up media the media type, weight, and size series must be set up whenever you load new media in the machine or change the type and/or siz...

  • Page 244

    216 chapter 5 additional operations from the printer menu the media size series and sizes that can be set up are as follows. Size series eligible media iso a series a4 (210 × 297 mm) a3 (297 × 420 mm) a3 roll media (297 mm wide) a2 (420 × 594 mm) a2 roll media (420 mm wide) a1 (594 × 841 mm) a1 roll...

  • Page 245

    217 5.9 print setup menu the media [weight] can been specified as follows: procedure 1 press the the machine will enter the offline mode and the [network/port set] menu will display. 2 press the > key. Sp. A-2 series sp. A-1 (620 × 871 mm) sp. A-1 roll media (620 mm wide) sp. A-2 (435 × 620 mm) sp. ...

  • Page 246

    218 chapter 5 additional operations from the printer menu the [print setup] menu will display. 3 press the > key. The submenu items will display. 4 press the > key. The menu items on the same level will display, in order. 5 press the > key. The submenu items on the next level will display. 6 press t...

  • Page 247

    219 5.9 print setup menu 2 press the > key. The specified value will display. 3 change the setting with the use of the > and > keys. 4 press the key to select the value. An asterisk [*] will appear beside the selected value. 5 press the > key to return to the higher level. Media / roll1 type : bond ...

  • Page 248: 5.10

    220 chapter 5 additional operations from the printer menu 5.10 automatic cut using the printer control panel this section describes how to cut the lead edge of the roll media. Procedure 1 select [media] from the menu displayed on the printer control panel. 2 press the > key. The level from which the...

  • Page 249

    221 5.10 automatic cut using the printer control panel 10 press the > key to return to the higher level. Downloaded from manualsprinter.Com manuals.

  • Page 250

    222 chapter 5 additional operations from the printer menu tray this normally is set to [auto] and should not be changed by the user. Consult your xerox service representative before changing this setting. Fuser this normally is set to [auto] and should not be changed by the user. Consult with your x...

  • Page 251

    Chapter chapter 0 6 ethernet print service (for unix) chapter 6 downloaded from manualsprinter.Com manuals.

  • Page 252: 6.1

    224 chapter 6 ethernet print service (for unix) 6.1 overview of the ethernet print service use the ftp command or the lpr command to print from the xerox 6030/6050 wide format when running on unix and the tftp command for the xerox 6050a. This section explains how to set up the ftp and lpr commands ...

  • Page 253: 6.2

    225 6.2 registering the xerox 6030/6050 wide format printer system 6.2 registering the xerox 6030/6050 wide format printer system to print from the xerox 6030/6050 wide format printer system, the xerox 6030/ 6050 wide format printer system should be registered on the tcp/ip network. Host system regi...

  • Page 254

    226 chapter 6 ethernet print service (for unix) registering the remote printer for printing using the lpr command, both the host system and the remote printer must be registered on the client workstation. Although the registration information depends on the system, the logical device names on the wo...

  • Page 255

    227 6.2 registering the xerox 6030/6050 wide format printer system aix 3.2.X for aix 3.2.X, register the remote printer in the [/etc/qconfig] file defining the printer- unique attributes. • editing the /etc/qconfig file in the example below, the xerox 6030/6050 wide format printer system called [okl...

  • Page 256: 6.3

    228 chapter 6 ethernet print service (for unix) 6.3 registering the xerox 6050a wide format printer system to print from the xerox 6050a wide format printer system, the 6050a should be registered on the tcp/ip network. Host system registration when the network information is managed by a name servic...

  • Page 257

    229 6.3 registering the xerox 6050a wide format printer system registering the remote printer for printing using the lpr command, both the host system and the remote printer must be registered on the client workstation. Although the registration information depends on the system, the logical device ...

  • Page 258

    230 chapter 6 ethernet print service (for unix) aix 3.2.X for aix 3.2.X, register the remote printer in the [/etc/qconfig] file defining the printer- unique attributes. • editing the /etc/qconfig file in the example below, 6050a called [oklahoma] is registered in the [/etc/qconfig] file. With this s...

  • Page 259: 6.4

    231 6.4 printing using the ftp command (6030/6050 only) 6.4 printing using the ftp command (6030/ 6050 only) details of the ftp command are explained below. Printing this section explains the printing procedure using the ftp command. Procedure 1 enter the ftp command and the network that is register...

  • Page 260

    232 chapter 6 ethernet print service (for unix) 3 enter the password of the user logged in at step 2 . If the user information registered in the xerox 6030/6050 wide format matches the logged-in user password, the login acceptance message is displayed. 4 specify a logical printer (example: plt00h). ...

  • Page 261

    233 6.4 printing using the ftp command (6030/6050 only) 7 specify the end. Enter the bye subcommand. A message indicating that ftp command has completed will be displayed. Ftp> bye 221 bye...See you later % downloaded from manualsprinter.Com manuals.

  • Page 262

    234 chapter 6 ethernet print service (for unix) other subcommands this section explains the ftp subcommands. Ascii: sets transfer data to the ascii format. Bin: sets transfer data to the binary format. Bye: terminates ftp processing. Cd: change directory; will display logical printer. Dir: displays ...

  • Page 263

    235 6.4 printing using the ftp command (6030/6050 only) message list this section explains messages that may be displayed during printing using the ftp command. Status: cannot establish connection for data transfer. Action: wait a few moments and try again. Status: cannot create a control file using...

  • Page 264

    236 chapter 6 ethernet print service (for unix) status: a data connection error occurred during file transfer. Action: establish the connection and transfer the file again. Status: a non-existent directory (logical printer) is specified. Action: specify the correct directory (logical printer). Statu...

  • Page 265

    237 6.4 printing using the ftp command (6030/6050 only) status: failed to transfer the file. Action: wait a few moments and try again. Status: failed to receive the file transfer end message. Action: wait a few moments and try again. Status: failed to receive the file transfer permission message. Ac...

  • Page 266

    238 chapter 6 ethernet print service (for unix) status: the user name and password do not match. Action: log in again with the correct user name and password. Status: failed to open the directory by the list command. Action: wait a few moments and transfer the command again. Status: ascii or binary ...

  • Page 267

    239 6.4 printing using the ftp command (6030/6050 only) status: transfer by an unsupported type was attempted. Action: specify [ image (binary) ] or [ ascii ] with the type command. Status: logged in with a user name that is not registered. Action: log in with a registered user name. In the factory,...

  • Page 268: 6.5

    240 chapter 6 ethernet print service (for unix) 6.5 printing using the lp/lpr command details of each command are explained. Printing (lpr command) this section explains the printing procedure using the lpr command. Format -p specify a logical printer name immediately after p (with no space) to outp...

  • Page 269

    241 6.5 printing using the lp/lpr command usage examples (6030/6050) the printing procedure using the lpr command is as explained below. Example 1:to print one copy of the file [drawa.Hpgl] by logical printer [plt00h]. Example 2:to print two copies each of the files [drawb.Hpgl] and [drawc.Hpgl] by ...

  • Page 270

    242 chapter 6 ethernet print service (for unix) usage examples (6050a) the printing procedure using the lpr command is as explained below. Example 1:to print one copy of the file [drawa.Hpgl] by logical printer [raw]. Example 2:to print two copies each of the files [drawb.Hpgl] and [drawc.Hpgl] by l...

  • Page 271

    243 6.5 printing using the lp/lpr command printing (lp command) (for sunos 5.X) this section explains the printing procedure using the lp command. Format lp [-d data is output to the specified printer. -n specify the number of copies by entering a numeric value from 1 to 99 for 6030/ 6050 and 1 to 9...

  • Page 272

    244 chapter 6 ethernet print service (for unix) status display (lpq command) this section explains how to display the status of a file that has been specified for printing using the lpr command. Format -p enter the name of the logical printer immediately after the p (with no space). After doing this...

  • Page 273

    245 6.5 printing using the lp/lpr command example 3:display the status of a file transferred to logical printer [plt01h] ([lpq -p oklahoma] for 6050a). When the transfer of the file [drawd.Hpgl] to the xerox 6030/6050/6050a wide format is completed, and the xerox 6030/6050/6050a wide format has rece...

  • Page 274

    246 chapter 6 ethernet print service (for unix) cancel (lprm command) this section explains how to cancel a print job submitted from the network. Format -p specify a logical printer name immediately after the p (with no space) to cancel a print job that is being processed by the specified printer. I...

  • Page 275

    247 6.5 printing using the lp/lpr command example 2:displays the status of logical printer [plt01h] and the canceling of job id [123] this print job cannot be canceled because it is already in progress. Example 3:displays the status of logical printer [plt01h] and the canceling of job id [417] in th...

  • Page 276

    248 chapter 6 ethernet print service (for unix) example 4:displays the status of logical printer [plt01h] and the canceling of job id [416] in the client queue if the file transfer to the xerox 6030/6050 wide format completes before the job in the client queue is canceled, the print job cannot be ca...

  • Page 277

    249 6.5 printing using the lp/lpr command message list (6030/6050 only) this section explains messages that may be displayed during printing using the lpr command. These messages depend on the system because they are output from the client workstation. Status: the lpd daemon on the client failed to ...

  • Page 278

    250 chapter 6 ethernet print service (for unix) status: failed to delete a job from logical printer pltxx on the print service side. Action: check by the lpq command whether the specified job has already changed from the wait status in the queue to the processing status. Status: failed to establish ...

  • Page 279

    Chapter chapter 0 7 maintenance chapter 7 downloaded from manualsprinter.Com manuals.

  • Page 280: 7.1

    252 chapter 7 maintenance 7.1 loading toner observe the following precautions when handling the toner. • handle the toner carefully to avoid spilling it on your clothing or around the machine. • never throw a used toner cartridge in an open flame. Load the toner as described below. Procedure 1 lift ...

  • Page 281

    253 7.1 loading toner 3 take the toner cartridge out of the package and prepare it for loading. 4 open the lid of the toner supply port. 5 insert the left side notch, located at the bottom of the toner cartridge, into the end of the toner supply port. Then hold the toner cartridge vertically on top ...

  • Page 282

    254 chapter 7 maintenance 7 slide the toner supply lever back and remove the cartridge. 8 close the lid on the toner supply port. 9 pull up the lock lever in the middle rear of the scanner document table and then close the document insertion guide. 10 pull the scanner back to the front. • if the ton...

  • Page 283

    Chapter chapter 0 8 problem solving chapter 8 downloaded from manualsprinter.Com manuals.

  • Page 284: 8.1

    256 chapter 8 problem solving 8.1 check the control panel(s) when a machine failure is suspected, for example, when a print cannot be made or the image quality is defective, first check for error messages or error codes on the printer control panel. When an error code is displayed, press the > and >...

  • Page 285: 8.2

    257 8.2 poor image quality 8.2 poor image quality perform the following corrective measures if the copies or prints display one of the image quality defects listed below. Image quality defect corrective measure the print displays excessive background verify that the image density setting is correct....

  • Page 286: 8.3

    258 chapter 8 problem solving 8.3 other problems follow the instructions provided in the table to recover from the errors which are listed. Error recovery nothing is displayed on the printer control panel. • verify that the machine is connected to a correctly rated power supply, that the power plug ...

  • Page 287: 8.4

    259 8.4 printer troubleshooting 8.4 printer troubleshooting this section provides recovery methods for problems which are associated with printing. Paper size #1was mistakenly selected. (6030/6050 only) Ö there are cases where it is possible to override this with the [media margin] settings. The [me...

  • Page 288

    260 chapter 8 problem solving [disable]. The [white mode] is valid for hp-gl and versatec data only. Refer to the "color option" section of "4.3 logical printer print settings" for details on available functions. Downloaded from manualsprinter.Com manuals.

  • Page 289

    261 8.4 printer troubleshooting jams in the feeder (roll media) media jams in the roll feeder(s) are caused by incorrect media loading methods and defects in the media feeding mechanism. Reload the media according to the following procedure. Procedure 1 open the media tray. 2 rewind the media on the...

  • Page 290

    262 chapter 8 problem solving 4 rotate the knob until the lead edge of the media can be seen in the window. 5 gently but firmly close the media tray until it is as far back as it can go. The led on the front of the media tray will illuminate, and the roll paper will be automatically positioned. 6 li...

  • Page 291

    263 8.4 printer troubleshooting jams in the printer and ejection port remove media jams from the printer and ejection port following the instructions below. Procedure 1 lift up the lever located on the left-hand side of the output unit. 2 use both hands to lift up the top of the unit. 3 check to det...

  • Page 292

    264 chapter 8 problem solving 4 pull the jammed media slowly toward you to remove it. 5 pull the green stopper to the front. 6 grasp the document table (6030/6050 only) with both hands and gently but firmly lower it into place. • avoid damaging the media. • do not touch any of the high- temperature ...

  • Page 293

    Chapter chapter 0 9 specifications chapter 9 downloaded from manualsprinter.Com manuals.

  • Page 294: 9.1

    266 chapter 9 specifications 9.1 main specifications (6030/6050) supported data formats • hp-gl formats: hp-gl, hp-gl2, and hp-rtl • versatec formats: versatec random format (vrf), versatec color graphic language (vcgl) • tiff formats: conforming to tiff version 6.0 • cals formats: cals type 1 • ps/...

  • Page 295

    267 9.1 main specifications (6030/6050) host system interfaces tcp/ip physical interface: 100base-tx and 10base-t (transfer speed manual selection, automatic selection) maximum transfer speed:100 mbps and 10 mbps data link: ethernet version 2 rs232c physical interface: eia-232-e conformant to rs-232...

  • Page 296

    268 chapter 9 specifications standard sizes and drawing areas series standard size dimensions drawing area (dots) iso a series a0 841 × 1,189 mm (33.12 x 46.77") 19,872 × 28,064 a1 594 × 841 mm (23.36 x 33.12") 14,016 × 19,872 a2 420 × 594 mm (16.53 x 23.36") 9,920 × 14,016 a3 297 × 420 mm (11.68 x ...

  • Page 297

    269 9.1 main specifications (6030/6050) arch e 36 x 48 inches (914.4 x 1219.2 mm) 21,600 × 28,800 d 24 x 36 inches (609.6 x 914.4 mm) 14,400 x 21,600 c 18 x 24 inches (457.2 x 609.6 mm) 10,800 × 14,400 b 12 x 18 inches (304.8 x 457.2 mm) 7,200 × 10,800 a 9 x 12 inches (228.6 x 304.8 mm) 5,400 × 7,20...

  • Page 298

    270 chapter 9 specifications print length • when the ps/pdf option is not in use • when the ps/pdf option is in use paper type paper width 512mb (standard) 1024mb (extended) plain paper a0 5,500mm 15,000mm a1 7,500mm 15,000mm a2 6,000mm 6,000mm a3 6,000mm 6,000mm 36" 5,000mm 13,500mm 24" 6,900mm 15,...

  • Page 299

    271 9.1 main specifications (6030/6050) frame memory - maximum number of spools mounted frame memory configuration number of sheets a0 a1 a2 a3 a4 512 mb 6030 extended/ 6050 standard 6 12 25 51 100 1 gb 6030/6050 extended 14 28 56 112 222 frame memory - maximum number of spools indicates the number ...

  • Page 300: 9.2

    272 chapter 9 specifications 9.2 main specifications (6050a) supported data formats • hp-gl formats using hp750c emulation (hp-gl2, hp-rtl) • tiff 6.0 (including lzw) • cals 1&2 • calcomp 906/907/951/pci • filenet • nirs • cgm • vcgl • vrf • versatec data standards • xerox emulation 150 • c4 • jpeg ...

  • Page 301

    273 9.2 main specifications (6050a) host system interfaces tcp/ip physical interface: 10-100base-t (using manual selection) 10-100-1000base-t (using auto selection with use of cat6 cable) maximum transfer speed:10/100/1000 mbps data link: cat6 cable required for gigabit data transfer ethernet connec...

  • Page 302

    274 chapter 9 specifications standard sizes and drawing areas series standard size dimensions drawing area (dots) iso a series a0 841 × 1,189 mm (33.12 x 46.77") 19,872 × 28,064 a1 594 × 841 mm (23.36 x 33.12") 14,016 × 19,872 a2 420 × 594 mm (16.53 x 23.36") 9,920 × 14,016 a3 297 × 420 mm (11.68 x ...

  • Page 303

    275 9.2 main specifications (6050a) ansi e 34 × 44 inches (863.6 x 1117.6 mm) 20,400 x 26,400 d 22 × 34 inches (558.8 x 863.6 mm) 13,200 x 20,400 c 17 × 22 inches (431.8 x 558.8 mm) 10,200 x 13,200 b 11 × 17 inches (279.4 x 421.8 mm) 6,600 x 10,200 a 8.5 × 11 inches (215.9 x 279.4 mm) 5,100 x 6,600 ...

  • Page 304

    276 chapter 9 specifications print length maximum print length = 50,000mm. Paper type paper width 512mb (standard) plain paper/ vellum/film a0 3,600mm a1 7,272mm a2 14,544mm a3 29,088mm a4 58,176mm downloaded from manualsprinter.Com manuals.

  • Page 305: 9.3

    277 9.3 media specifications 9.3 media specifications • for sharp image copying, use the media recommended by xerox. • to prevent media jams or uneven printing, do not use creased, wrinkled, or curled media. • when using unusually flexible media, support the media as it comes out of the media ejecti...

  • Page 306: 9.4

    278 chapter 9 specifications 9.4 machine specifications (6030/6050) main specifications item specification type desktop type of photo sensitive material opc recording method led exposure, xerographic development system development method dry development (one component) fixing method heat roll resolu...

  • Page 307

    279 9.4 machine specifications (6030/6050) * maximum length will differ based on the amount of memory installed. Media maximum width: 914 mm/36" (a0 size) minimum width: 210 mm/8.27" (a4 size) maximum length *:plain media (a0/a1 width) 15 m/ 49.2’, a2/a3 width 6 m/19.68’ vellum/film: twice standard ...

  • Page 308

    280 chapter 9 specifications xerox 6030/6050 wide format amount of memory installed a0 size a1 size a2 size a3 size 512 mbyte 7.5 m 7.5 m 6 m 6 m 1024 mbyte 15 m 15 m 6 m 6 m downloaded from manualsprinter.Com manuals.

  • Page 309: 9.5

    281 9.5 machine specifications (6050a) 9.5 machine specifications (6050a) main specifications item specification type desktop type of photo sensitive material opc recording method led exposure, xerographic development system development method dry development (one component) fixing method heat roll ...

  • Page 310

    282 chapter 9 specifications media maximum width: 914 mm/36" (a0 size) minimum width: 210 mm/8.27" (a4 size) maximum length *:plain media (a0/a1 width) 15 m/ 650’, a2/a3 width 6 m/19.68’ vellum/film: twice standard size minimum length: 210 mm/8.27" dimensions combination type 1,250 (w) × 640 (d) × 1...

  • Page 311

    Appendixes downloaded from manualsprinter.Com manuals.

  • Page 312

    2 appendixes appendix 1 connector specifications rs-232c pin assignment (6030/6050 only) centronics pin assignment printer side (36-pin amphenol half-pitch type) pin no. Signal name wiring host side controller side straight cable cross cable 1 1 7,8 cd y 2 2 3 rd y 3 3 2 td y 4 4 6 dtr y 5 5 5 gnd y...

  • Page 313

    3 appendix 1 connector specifications host side (36-pin amphenol type) host side (25-pin d-subconnector type) terminal no. Signal name terminal no. Signal name pin connection 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 nstrobe data 1 data 2 data 3 data 4 data 5 data 6 data 7 data 8 nack busy perror...

  • Page 314

    4 appendixes appendix 2 hp-gl/hp-gl2 command list (6030/6050) this section explains the hp-gl and hp-gl/2 command support status that are unique to the 6030/6050 wide format. Command list the following table shows the hp-gl and hp-gl/2 command support status. Y command fully supported. Y* activates ...

  • Page 315

    5 appendix 2 hp-gl/hp-gl2 command list (6030/6050) bp instructs the start of plotting. Outputs a label by overlaying on job log and plot output. Y y ca sets an auxiliary character set. Y y cc specifies character smoothness. Y n cf specifies an outline font rendering method. Y n ci plots a circle of ...

  • Page 316

    6 appendixes es specifies the character spacing. Y y y ew draws a sector. Y y y fi specifies a font as the primary font. Y n fn specifies a font as the secondary font. Y n fp fills in a polygon registered in the polygon buffer. Y y y fr feeds paper by one frame for long-axis plotting. [interpreted a...

  • Page 317

    7 appendix 2 hp-gl/hp-gl2 command list (6030/6050) np sets the hpgl/2 palette size. Y y nr: sets the printer to local. [interpreted as output trigger] y y y* oa outputs the current position on the printer coordinate system and the pen up-down information. Y y oc outputs the current position instruct...

  • Page 318

    8 appendixes pg feeds the paper forward or backward. Y y y* (hp-gl) y (hp-gl/2) pm registers a user-specified polygon in the polygon buffer. Y y y pr moves the pen by relative coordinates. Y y y ps specifies the paper size. Y y y (hp-gl) y* (hp-gl/2) pt specifies the fill spacing. Y y pu raises the ...

  • Page 319

    9 appendix 2 hp-gl/hp-gl2 command list (6030/6050) ss specifies a font specified by the sd command. Y y y st sets the plot quality. Y n sv selects a pattern type for vector and area filling. Y n td specifies whether to execute the functions of control characters or to print the control characters at...

  • Page 320

    10 appendixes appendix 3 hp-rtl command list (6030/ 6050) command name command command meaning and function limit enter hpgl/2 mode esc % # b starts processing the following data as an hp-gl2 command. Transfer color palette ignored enter pcl mode esc % # a starts processing the following data as an ...

  • Page 323

    13 appendix 4 tiff tag list (6030/6050) appendix 4 tiff tag list (6030/6050) tag id tag name revision 6030/6050 wide format hex dec 4.0 5.0 6.0 00fe 254 newsubfiletype - y y y* bit 0: low resolution image - y y - bit 1: multi-page image - y y y bit 2: transparency mask - y y - 00ff 255 subfiletype y...

  • Page 324

    14 appendixes 8: cielab - - y - 0107 263 thresholding y y y - 1: no dithering or halftoning y y y - 2: dithering or halftoning y y y - 3: randomized-processed image y y y - 0108 264 cellwidth y y y - 0109 265 cellwidth y y y - 010a 266 fillorder y y y y 1: mgb Æ lsb y y y y 2: lsb Æ mgb y y y y 010d...

  • Page 325

    15 appendix 4 tiff tag list (6030/6050) 011d 285 pagename y y y y 011e 286 xposition y y y y 011f 287 yposition y y y y 0120 288 freeoffsets y y y - 0121 289 freebytecounts y y y - 0122 290 grayresponseunit y y y - 0123 291 grayresponsecurve y y y - 0124 292 t4options y y y y* bit 0: 2-dimensional c...

  • Page 326

    16 appendixes 0144 324 tileoffsets - - y - 0145 325 tilebytecounts - - y - 014c 332 inkset - - y - 014d 333 inknames - - y - 014e 334 numberofinks - - y - 0150 336 dotrange - - y - 0151 337 targetprinter - - y - 0152 338 extrasamples - - y - 0153 339 sampleformat - - y - 1: unsigned integer data - -...

  • Page 327

    17 appendix 4 tiff tag list (6030/6050) 8298 33432 copyright - - y y tag id tag name revision 6030/6050 wide format hex dec 4.0 5.0 6.0 downloaded from manualsprinter.Com manuals.

  • Page 328

    18 appendixes downloaded from manualsprinter.Com manuals.

  • Page 329: Symbols

    1 symbols "1.1 outline of xerox 6030/6050 wide format print service" 224 90-degree rotation 41, 146 a administrator top page 53 alignment mark printing 135 area mode 128 auto (input option) 123 auto (output option) 139 auto layouts 127 auto mapping 117 auto r/e 169 auto roll 79 auto scale 146 auto-l...

  • Page 330

    2 eop command 155 error log 176 error log 208 error message 136, 137 f film 121 ftp command 224, 231 h help 55 i image fragmentation function 42 input image size 123 input media series 115 input option 123 interface 33, 267, 273 iot status 188 ip command 243 ipq command 244 ipr command 224, 240 iprm...

  • Page 331

    3 media size 115 media tray (optional) 4 media tray (standard) 4 media type 121, 166 (menu) button 45 meter display 188, 213, 214 method of cutting paper 170 mirror image 41, 146 mix (output option) 139 mix2 (output option) 139 msi & manual paper feed unit 120 o offline mode 45 offline plot 47, 212 ...

  • Page 332

    4 r reprinting 42, 212 resolution 162 roll media 139, 168 rs232c 267 s serial 64 (set) button 45 sets joint processing for lines 148, 151, 156 sets the end of the line 148, 151, 156, 160, 161 setup screen 4 shaft 18 size mapping 40, 117, 169 size recognition priority mode 143 size specification 123,...