Xerox Wide Format 6204 Installation Manual - Installation For Sun Solaris

Xerox FreeFlow Accxes

Drivers & Client Software Installation Guide 

9

9.  In the Utilities & Applications section, double click on the “Accxes Client Tools (ACT) & 

Accxes Account Management Tool (AMT) hyperlink.” 

10.  Select the Open or Save button to start the zip file download, which may take an hour. 

11.  Double click on the downloaded zip file.  Extract the files.  Double click on the install.exe 

to start the installation software. 

12.  Follow the instructions on the screens, as explained in the above section here, entitled 

“From CD-ROM”. 

Installation for Sun Solaris  

The following installation procedure is for the Sun Solaris 2.8, 2.9, or 2.10 based environments. 

Note: If you are using Solaris, you need to download the patches for JVM 1.4.2.06 from the 

Internet for your version of Solaris. 

From CD-ROM: 

1.  Start your Sun Solaris workstation and log on to your desktop. 

2.  Insert the Accxes Client Tool & Account Management Tool CD into your CD-ROM drive. 

3.  In a command window, type the following:  

cd  

./setup.bin  

NOTE:  In all cases  is the directory where the CD-ROM is 

mounted. 

4.  The Install Anywhere software will load. 

5.  Follow the directions on the screens. 

6.  On the “Choose Shortcut Location” screen, select where you want the shortcut to be 

located.  On Sun Solaris it cannot be located on the desktop.  Click the Next button. 

7.  On the “Choose Install Set” screen, select the FreeFlow Accxes Client Tools button and 

Next button.  On the Install Complete screen, click the Done button. 

8.  Remove the Client Tools CD. 

NOTES: ACT does not support a parallel port on Solaris; therefore it will not be listed on 

the Device Manager tab. 

When running the ACT under Solaris version 2.6 and 2.7, the arrow keys will function 

using the arrow keys on the numeric key pad instead of the keyboard’s separate arrow 

keys.